Catalog item
Request a quoteCIRCUIT BREAKER
5925FSC
00NCB code
308-7148Item number
NIIN 00-308-7148
- DEMIL code
- A
Identification
- Item name code
- 00136
- PINC
- 0000136
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- DEMIL integrity code
- 1
- NIIN assigned
- 21-OCT-73
- Precious metals indicator
- A
- ADP equipment code
- 0
- Hazardous material indicator
- P
- Schedule B export code
- 8536200040
- Last known source of supply
- SMS
Part numbers
| Part number | CAGE | CAGE status | RNCC | RNVC | Document availability code | RNAAC | RNFC | RNSC | SADC |
|---|---|---|---|---|---|---|---|---|---|
| GA51598L1 | 74193 EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV | H | C | 1 | 5 | TX | AF | ||
| 70-132-42MG6 | 74193 EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV | H | E | 8 | A | TX | |||
| MIL-C-55629/2 | 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | A | 5 | 9 | E | TX | B | ||
| M55629/2-022 | 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | A | 2 | 2 | E | TX | 4 | D | |
| MIL-PRF-55629/2 | 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | A | 4 | 1 | E | ZZ | |||
| APL1-1R0-52-202-M | 81541 SENSATA TECHNOLOGIES MARYLAND, INC | A | C | 1 | E | TX | AF | ||
| APL1-1R0-55629-2-022 | 81541 SENSATA TECHNOLOGIES MARYLAND, INC | A | C | 1 | 5 | TX | 3 | D | |
| APL1-1REC4-M55629/2-022 | 82647 SENSATA TECHNOLOGIES, INC. DIV SENSATA ATTLEBORO | A | 5 | 1 | 5 | 9Z | 4 | A | |
| 315C862G09 | 89946 EATON CORPORATION DBA EATON INOAC | A | E | 8 | A | TX | |||
| GA51598L1 | 01714 LUCENT TECHNOLOGIES INC ADVANCED TECHNOLOGY SYSTEMS | A | C | 1 | 5 | TX | AF | ||
| 711570-255 | 05869 RAYTHEON COMPANY DIV RMD STRATEGIC | A | E | 8 | A | TX |
Characteristics
| ARC QUENCHING METHOD | MAGNETIC BLOWOUT |
|---|---|
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.800 |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THREAD PITCH DIAMETERS | INCHES 0.1177 TO 0.1214 |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | SINGLE LOCATION DC 2000.0 |
| CIRCUIT PROTECTION TYPE | SINGLE LOCATION OVERCURRENT |
| TRIP RELEASE METHOD | SINGLE LOCATION MAGNETIC |
| TRIP RELEASE CHARACTERISTIC | SINGLE LOCATION TIME DELAY |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 |
| RESET METHOD | MANUAL |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| POLE QUANTITY | 1 |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | SINGLE LOCATION MINIMUM AT 200 PCT 0.600 AND MAXIMUM AT 200 PCT 8.000 |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | SHOCK RESISTANT AND VIBRATION RESISTANT |
| BOSS HEIGHT | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.171 |
| BODY WIDTH | INCHES MINIMUM 0.730 AND INCHES MAXIMUM 0.780 |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 1.660 AND INCHES MAXIMUM 1.960 |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 2.046 AND INCHES MAXIMUM 2.078 |
| SWITCH LOCATION AND POSITION DESIGNATION | INTERNAL AT POLE ONE |
| THREAD QUANTITY PER INCH | 32 |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | SINGLE LOCATION AMPERES DC 2.0 |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | SINGLE LOCATION DC 50.0 |
| ACTUATOR POSITION DESIGNATION | AT POLE ONE |
| AUXILIARY SWITCH FUNCTION AND QUANTITY | ALARM 1 |
| INTERNAL TRIP RELEASE CONFIGURATION | SINGLE LOCATION SERIES TRIP |
| NOMINAL THREAD SIZE | INCHES 0.138 |
| MANUAL ACTUATOR TYPE AND QUANTITY | TOGGLE 1 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-55629 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-55629 TO 2 |
| MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| BODY STYLE | |
| BODY LENGTH | INCHES MAXIMUM 2.510 |
| SWITCH CURRENT RATING AND TYPE IN AMPS | AC 10.0 AND DC 2.0 |
| ACTUATOR FUNCTION | TRIP-RESET |
| MATERIAL | CASE PLASTIC |
| SWITCH VOLTAGE RATING AND TYPE IN VOLTS | AC 250.0 AND DC 50.0 |
| SWITCH TERMINAL TYPE | TAB, SOLDER LUG |
MOE rules
| MOE rule | MOE CD | Date assigned | PICA | PICA LOA | Auth collab |
|---|---|---|---|---|---|
| YB01 | YB | 01-JUL-01 | YB | 81 | YB |
| ZT01 | ZT | 01-NOV-95 | ZT | 81 | ZT |
| ZU01 | ZU | 01-APR-03 | ZU | 81 | ZU |
| ZW01 | ZW | 01-NOV-05 | ZW | 81 | ZW |
| ZX01 | ZX | 01-JUL-19 | ZX | 81 |
Freight
- ACTY CD
- TX
- NMFC
- 061700
- NMFC sub
- Z
- Uniform freight class
- 34580
- Less than truckload
- W
- Water commodity code
- 72D
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- HZ
- NMF description
- ELEC APPLIANCES/INSTRUMENTS NOI
Related items
Standardization
- Item standardization code
- 5
- Orig stdzn dec
- GX
- Dt stdzn dec
- 01-AUG-2007
- NIIN status code
- 0
Cancelled and replaced NIINs
| FSC | Cancelled NIIN | NIIN status code | Effective date | DEMIL code |
|---|---|---|---|---|
| 5925 | 5925-00-100-5177 | 5 | 02-JUL-2026 | A |
| 5925 | 5925-00-459-5441 | 5 | 02-JUL-2026 | A |
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.