Catalog item
Request a quoteSYNCHRO,DIFFERENTIAL TRANSMITTER
5990FSC
00NCB code
924-3939Item number
NIIN 00-924-3939
- DEMIL code
- B
Identification
- Item name code
- 02071
- PINC
- 0002071
- Criticality code
- X
- II
- 0
- DEMIL code
- B
- NIIN assigned
- 20-JAN-66
- Precious metals indicator
- U
- Hazardous material indicator
- N
- Schedule B export code
- 9014900000
- Last known source of supply
- S9E
Part numbers
| Part number | CAGE | CAGE status | RNCC | RNVC | Document availability code | RNAAC | RNFC | RNSC |
|---|---|---|---|---|---|---|---|---|
| MILS20708-81 | 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | A | 4 | 1 | 3 | TX | 3 | D |
| 11CDX4B | 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | A | 2 | 2 | 3 | TX | 3 | D |
| Q 320 707 002 | C2463 RHEINMETALL SOLDIER ELECTRONICS GMBH | A | 5 | 2 | 1 | ZG | 4 | D |
| X40-201-972 | A181N BAE SYSTEMS BOFORS AB | A | 5 | 2 | 3 | 9Z | 4 | D |
| X40-201-972 | S3715 BOFORS AB | R | 5 | 9 | 3 | ZG | 4 | B |
| 11CDX4B | K0624 MUIRHEAD AEROSPACE LTD | A | 5 | 2 | 5 | ZN | D | |
| Q 320 707 002 | S3092 RHEINMETALL AIR DEFENCE AG | A | 5 | 2 | 5 | ZN | 4 | D |
Characteristics
| ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 79.00 AND MAXIMUM 85.00 |
|---|---|
| BODY STYLE | |
| FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1590.00 AND MAXIMUM 2050.00 |
| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 49.0 |
| STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 530.0 |
| ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.1900 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS20708 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS20708 TO 81 |
| TERMINAL TYPE AND QUANTITY | SCREW 6 |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| SPLINE TOOTH QUANTITY | 21 |
| TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.070 |
| SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| OVERALL LENGTH | INCHES NOMINAL 2.4130 |
| FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| UNDERCUT DIAMETER | INCHES NOMINAL 0.9370 |
| UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| MAXIMUM TEMP RISE | CELSIUS 20.0 |
| TERMINAL LOCATION | REAR |
| SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1900 |
| SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| SHAFT THREAD CLASS | 2A |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 23.00 AND MAXIMUM 33.00 |
| ALIGNMENT HOLE QUANTITY | 4 |
| PILOT LENGTH | INCHES NOMINAL 0.0620 |
| PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 60.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8510 |
| SPLINE TOOTH DIAMETRAL PITCH | 120 |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 470.00 AND MAXIMUM 570.00 |
MOE rules
| MOE rule | MOE CD | Date assigned | PICA | PICA LOA | Auth collab |
|---|---|---|---|---|---|
| WB01 | WB | 01-FEB-05 | WB | 81 | WB |
| WG01 | WG | 01-OCT-17 | WG | 81 | WG |
| YB01 | YB | 01-FEB-94 | YB | 81 | YB |
| ZG01 | ZG | 01-APR-91 | ZG | 81 | ZG |
| ZR01 | ZR | 01-JUL-97 | ZR | 81 | ZR |
| ZW01 | ZW | 01-NOV-98 | ZW | 81 | ZW |
Freight
- ACTY CD
- TX
- NMFC
- 062120
- NMFC sub
- Z
- Uniform freight class
- 34760
- Less than truckload
- W
- Less than carload
- Q
- RVC
- 1
- Water commodity code
- 590
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- HZ
- NMF description
- GENERATORS/MOTORS/PARTS NOI
Related items
Standardization
- Item standardization code
- 3
- Orig stdzn dec
- KA
- Dt stdzn dec
- 25-JUL-1972
- NIIN status code
- 0
Cancelled and replaced NIINs
- FSC
- 5990
- Cancelled NIIN
- 5990-00-785-3214
- NIIN status code
- 5
- Effective date
- 01-JUL-2026
- DEMIL code
- A
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.