Catalog item
Request a quoteMOTOR,DIRECT CURRENT
6105FSC
00NCB code
921-5194Item number
NIIN 00-921-5194
- DEMIL code
- B
Identification
- Item name code
- 16350
- PINC
- 0016350
- Criticality code
- Y
- II
- M
- DEMIL code
- B
- DEMIL integrity code
- 3
- NIIN assigned
- 24-JAN-66
- Precious metals indicator
- A
- ADP equipment code
- 0
- Hazardous material indicator
- N
- Schedule B export code
- 8501322000
- Last known source of supply
- SMS
Part numbers
- Part number
- 63D11138
- CAGE
- 18894AIR ARMAMENT CENTER/ EN
- CAGE status
- A
- RNCC
- 3
- RNVC
- 2
- Document availability code
- 1
- RNAAC
- BF
- RNFC
- 3
- RNSC
- D
Characteristics
| WINDING TYPE | SHUNT WOUND |
|---|---|
| SPLINE LENGTH | SINGLE END INCHES NOMINAL 1.140 |
| MOUNTING METHOD | FIXED BASE |
| OVERALL LENGTH | INCHES 7.760 |
| OVERALL WIDTH | INCHES 5.145 |
| LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.140 |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.525 |
| ROTOR SPEED RATING IN RPM | HIGH FULL LOAD 6500.0 |
| CURRENT RATING IN AMPS | INPUT SINGLE 950.000 |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 28.0 |
| SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A14 |
| SPECIAL FEATURES | SHAFT MATERIAL IS STEEL,QQ-S-624,COMP 4130,THRU HARDENED SPLINE END OF SHAFT TO ROCKWELL C45-48,REST OF SHAFTTO BE ROCKWELL C30-33; PITCH=32/64 IN.; PITCH DIA.=0.3438 IN.; PRESSURE ANGLE=30 DEG.; TOOTH THK.=0.0479 IN.; BASEDIA.=0.2977 IN.; MEASURING PIN DIA.=0.060 IN.; MIN. MEASUREMENT OVER 2 PINS=0.4279 IN.; LG. OF ENGAGEMENT=0.630 IN. |
| TIME INTERVAL | SECONDS MAXIMUM ON 45.0 |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING METHOD | LOAD |
| TORQUE RATING AND TYPE | INCH-POUNDS STARTING 50.0 |
| SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.2513 |
| SPLINE QUANTITY | 11 |
| SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.375 |
| SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | GENERAL PURPOSE |
| OVERALL HEIGHT | INCHES 3.050 |
| SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| CRITICALITY CODE JUSTIFICATION | SPCL |
| POWER RATING | INPUT HORSEPOWER 3.000 |
MOE rules
- MOE rule
- YB01
- MOE CD
- YB
- Date assigned
- 01-APR-91
- PICA
- YB
- PICA LOA
- 81
- Auth collab
- YB
Freight
- ACTY CD
- BF
- NMFC
- 062120
- NMFC sub
- Z
- Uniform freight class
- 34760
- Less than truckload
- W
- Less than carload
- Q
- RVC
- 1
- Water commodity code
- 593
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- HZ
- NMF description
- GENERATORS/MOTORS/PARTS NOI
Related items
Standardization
- Item standardization code
- 2
- Orig stdzn dec
- CX
- Dt stdzn dec
- 24-MAY-1982
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.