MECHANISM ASSY,AIRC

1440FSC

01NCB code

504-2405Item number

NIIN 01-504-2405

Identification

Part number: 3740AS130
CAGE: 30003
NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
CAGE status: A
RNCC: 3
RNVC: 2
Document availability code: E
RNAAC: KE

END ITEM IDENTIFICATION	LAU-7D/A
ACCESSORY COMPONENTS AND QUANTITY	ELECTRICAL CONNECTOR MOUNT 1; SUPPORT ASSY 1; CONNECTOR BRACKET ASSY 1; HARNESS, ELECTRICAL ASSY 1; PLATE ASSY 1; SPRING, DETENT 1; SOLENOID BRACKET 1; DETENT 1; COVER PLATE, FWD SNUBBER 2; LEVER RELEASE, FWD SNUBBER 2; SPRING FORWARD SNUBBER 2; RELEASE ARM, FWD SNUBBER 2; PIN, STAIGHT HEADED 3; STOP, SWITCH ACTUATOR 2; SPRING ACTUATOR 2; SNUBBER 2; SPACER, SNUBBER RELEASE LEVER 2; CAM ASSY, DETENT RELEASE 1; SOLENOID SPRING DISK LINK 1; DETENT SOLENOID LINK 1; SOLENOID RETURN SPRING 1; SOLENOID SEAL DIAPHRAGM 1; FWD SNUBBER BACK UP PLATE 2; DETENT PIN PIVOT 1; WASHER STRIKER POINT 2; BUSHING, STRIKER POINT 2; SPRING, STRIKER POINT 2; ELECTRIC CONTACT STRIKER POINT 2; LOCK WASHER 1; SOLENOID LINK RETAINER PIN 1; BUSHING, DETENT PIN 1; LOOP CLAMP 2; DETENT SOLENOID 1; BOOT SWITCH 2; HI TEMP SENSITIVE SWITCH 2; BEARING, DETENT SPRING 1; CONTROL VALVE ASSY 1; SWITCH ARM ASSY 1; SCREW 19; SET SCREW 2; BOLT 5; LAMINATED WASHER 1; FLAT WASHER 28; NUT 9; COTTER PIN 7; PIN 6

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Unit of issue: EA
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: EA
MIL-DTL-17667, neutral wrapping paper
Cush dun: GH
MIL-PRF-26514, Type I, Class 2, Grade C, flexible polyurethane foam, heavy load range
THK: B
1/2 inch thick
Unit cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
PKG data source: A

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: 00
No requirement.
UCL: B
Unit container provides level B packing protection.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 1.2000
UP SZ MAXB: 8.00000
UP SZ MAXL: 22.10000
UP SZ MAXH: 6.10000
Unit pack cube: 0.6240
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.