OUTBOARD ENGINE

2805FSC

01NCB code

659-4859Item number

NIIN 01-659-4859

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
3C0XA	1MQB3 S I T CORPORATION	A	3	2	5	HD
3C0XA	1JQZ6 AUGUSTA ENGINE PARTS, INC. DBA AUGUSTA ENGINE PARTS, INC.	A	3	2	5	HD
3C0XA	1VQ20 CENTRAL FLORIDA YAMAHA INC DBA BOATERS WORLD	A	3	2	5	HD
F90XB	4V176 YAMAHA MOTOR CORPORATION, U.S.A	A	3	2	5	HD	4	D
3C0XA	7Z016 KAMPI COMPONENTS CO INC	A	3	2	5	HD

CYLINDER QUANTITY	4
ASSEMBLY FORM	COMPLETE
STROKES PER CYCLE	4
STARTING METHOD	ELECTRIC
COOLING TYPE	DIRECT WATER
PROPELLER BLADE QUANTITY	3
PART NAME ASSIGNED BY CONTROLLING AGENCY	PROPELLING UNIT
SPECIAL FEATURES	ENGINE TYPE: IN-LINE FOUR CYLINDER; DISPLACEMENT: 97 CI (1596 CC); BORE X STROKE: 79 X 81.4MM (3.11 X 3.20IN); PROP SHAFT HORSEPOWER: 90HP @ 5500RPM; COMPRESSION: RATIO 9.6:1; FUEL INDUCTION: EFI/SOHC/4 VALVES PER CYLINDER; EXHAUST: THROUGH PROPELLER; INTAKE: SINGLE THROTTLE VALVE; IGNITION: TCI MICRO COMPUTER; SPARK PLUG: LFR5A-11-00-000; ALTERNATOR OUTPUT: 25AMP; STARTING SYSTEM: ELECTRIC W/PTT; LUBRICATION: WET SUMP; ENGINE OIL CAPACITY: 3.7L/3.5L W/WITHOUT FILTER; FULL THROTTLE RPM RANGE: 5000 - 6000 RPM; COOLING: WATER/THERMOSTATIC CONTROL; RECOMMENDED ENGINE OIL: YAMALUBE 4M (SEE OWNER'S MANUAL); RECOMMENDED FUEL: REGULAR UNLEADED (MINIMUM PUMP OCTANE 87); RECOMMENDED FUEL FILTRATION: YAMAHA MINI 10-MICRON FUEL/WATER SEPARATING FILTER (EXTERNAL); ETHANOL BLEND LIMIT: 10% MAXIMUM; GEAR RATIO: (25:11) 2.27:1; GEAR SHIFT: F-N-R; SHAFT LENGTH: L = 20" X = 25"; DEGREE OF TILT: 70; DEGREE OF TRIM:-4 THROUGH +16; STEERING ANGLE(MAX): 35 DEG FRCM CENTER,EITHER DIRECTION
FUEL TYPE	GASOLINE

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 372.0000
Unpackaged width: 15.200
Unpackaged length: 24.000
Unpackaged height: 0.000
Unit of issue: EA
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: 31
Waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: JA
A-A-3174, plastic sheet, polyolefin, 2 mil
Cush dun: AD
Cushion, anchor, block or brace as required.
THK: H
2 inches thick
Unit cont: F2
ASTM D6251, Type III, Class 2, overseas cleated plywood box or ASTM-D6880, Class 2, heavy duty nailed wood box.
PKG data source: A

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: 00
No requirement.
UCL: A
Unit container provides level A packing protection.
Lvl A: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.