Catalog item
Request a quoteGENERATOR,ENGINE ACCESSORY
2920FSC
00NCB code
294-3558Item number
NIIN 00-294-3558
- Unit price
- $1,999.61
- Unit of issue
- EA
- Source of supply
- SMS
- DEMIL code
- A
Identification
- Item name code
- 17311
- PINC
- 0017311
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- NIIN assigned
- 01-JAN-63
- Precious metals indicator
- A
- ADP equipment code
- 0
- Hazardous material indicator
- N
- Schedule B export code
- 8511500000
- FedMall
- Y
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-OCT-2026 | DN | J | SMS | EA | 0.0000 | $1,999.61 | 1 | U | 0 | 9B----- | $0.00 | N |
| 01-OCT-2026 | DS | J | SMS | EA | 0.0000 | $1,999.61 | 1 | U | 0 | ------- | $0.00 | I |
Part numbers
Characteristics
| MOUNTING STYLE | |
|---|---|
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1200 |
| SHAFT DRIVE END STYLE | |
| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 2.750 |
| THREAD DIRECTION | RIGHT-HAND |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.875 |
| THREAD DIAMETER | INCHES NOMINAL 0.500 |
| THREAD CLASS | 2A |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| MOUNTING HOLE THREAD CLASS | 2B |
| THREAD QUANTITY PER INCH | 20 |
| VOLTAGE IN VOLTS | 24.0 |
| PILOT HEIGHT | INCHES NOMINAL 0.250 |
| SPECIAL FEATURES | SHAFT DRILLED FOR COTTER PIN 3 THREADED POST TYPE TERMINALS,2 EA 1/4-20 THD,1 EA 10-24 THD |
| KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| THREAD LENGTH | INCHES NOMINAL 0.500 |
| SECOND STEP DIAMETER | INCHES NOMINAL 0.750 |
| KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.750 |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | INCHES NOMINAL 6.750 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 3000 |
| THREAD SERIES | UNF |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 125.0 |
MOE rules
- MOE rule
- N9BC
- MOE CD
- DN
- AMC
- 3
- AMSC
- H
- Date assigned
- 01-SEP-05
- IMC
- Z
- IMCA
- HD
- PICA
- GX
- PICA LOA
- 01
- SICA
- GH
- SICA LOA
- 5D
- Auth collab
- GX
- Supp collab
- HD
- Fmr MOE rl
- N9CD
Service data
Navy
- COG
- 9B
Freight
- ACTY CD
- XX
- NMFC
- 062120
- NMFC sub
- Z
- Uniform freight class
- 34760
- Less than truckload
- W
- Less than carload
- Q
- RVC
- 1
- Water commodity code
- 590
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- HZ
- NMF description
- GENERATORS/MOTORS/PARTS NOI
Packaging
Unit and preservation
- PICA SICA
- P
- PKG cat
- 41Z0
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- TOS
- B
- Intermediate container qty
- AAAQuantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
- Method of preservation
- 31Waterproof bag, heat sealed
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- 00No requirement
- Wrap mat
- 00No requirement
- Cush dun
- ZZSpecial requirements.
- THK
- C3/4 inch thick
- Unit cont
- E6Vendor's fiberboard box.
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- 00No special marking
- Inter cont
- DOAny suitable fiber box included in this table may be used (see J.4.9.1).
- Lvl A
- QPacking shall be accomplished in accordance with table C.II for the packing level specified.
- Lvl b
- QPacking shall be accomplished in accordance with table C-II for the packing level specified.
- Unit pack weight
- 55.0000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 1.1630
- OPI
- OOptions can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Packaging instructions
- PICA SICA
- P
- PKG design ACTY
- 16236
- SPI date
- 00000
Related items
Standardization
- Item standardization code
- 2
- Orig stdzn dec
- AX
- Dt stdzn dec
- 11-MAR-1972
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.