GEARCASE-MOTOR

3010FSC

00NCB code

159-1062Item number

NIIN 00-159-1062

Identification

HOLE DIAMETER	SINGLE END INCHES NOMINAL 0.0620
HOLE DEPTH	SINGLE END INCHES NOMINAL 0.1720
OVERALL WIDTH	INCHES 2.094
OVERALL HEIGHT	INCHES 2.438
OVERALL LENGTH	INCHES 2.031
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	INPUT LINE TO NEUTRAL SINGLE 115.0
GEARED HEAD OUTPUT SHAFT SPEED RATING	SINGLE END SINGLE REVOLUTIONS PER MINUTE 0.400
SHAFT END CHARACTERISTIC	SINGLE END SINGLE STYLE A13
PHASE	INPUT SINGLE
FREQUENCY IN HERTZ	60.0
TERMINAL TYPE AND QUANTITY	WIRE LEAD 4
MOUNTING FACILITY CIRCLE DIAMETER	INCHES 1.875
MOUNTING FACILITY TYPE AND QUANTITY	UNTHREADED HOLE(S) 2
INCLOSURE SPECIFICATION	COMMERCIAL
FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
POWER RATING	OUTPUT WATTS 1.5000
LENGTH OF SHAFT FROM HOUSING	SINGLE END INCHES 1.016
SPEED CONTROL METHOD AND DEVICE TYPE	AUTOMATIC MECHANICAL
SHAFT DIAMETER	SINGLE END INCHES NOMINAL 0.1720
CURRENT TYPE	INPUT AC
HOLE CENTER TO SHAFT END DISTANCE	SINGLE END INCHES NOMINAL 0.4060
SHAFT ROTATION DIRECTION	SINGLE END CLOCKWISE OR COUNTERCLOCKWISE
DUTY CYCLE	CONTINUOUS
ENCLOSURE FEATURE	OPEN PROTECTED
WINDING TYPE	SYNCHRONOUS
MOUNTING METHOD	FACE
COOLING METHOD	AMBIENT AIR
GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION	SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS

MOE rule	MOE CD	AMC	AMSC	Date assigned	PICA	PICA LOA	Auth collab
ZC01	ZC			01-APR-91	ZC	81	ZC
DGX1	DS	3	H	01-NOV-25	GX	01	GX

PICA SICA: P
PKG cat: 80ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: ZZ
Special requirements apply that are not represented by the code symbols; details are provided with the acquisition...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: PACKAGING SHALL BE IAW MI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.