GEARCASE-MOTOR

3010FSC

00NCB code

196-0805Item number

NIIN 00-196-0805

Identification

ENCLOSURE FEATURE	DRIPPROOF-15 DEG
SHAFT CENTER TO MOUNTING SURFACE DISTANCE	SINGLE END INCHES 2.250
FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION
MOUNTING FACILITY TYPE AND QUANTITY	UNTHREADED HOLE(S) 4
OVERALL LENGTH	INCHES 13.875
SHAFT DIAMETER	SINGLE END INCHES NOMINAL 0.6250
CURRENT TYPE	INPUT AC
COOLING METHOD	NATURAL CONVECTION VENTILATED
TORQUE RATING AND TYPE	FOOT-POUNDS RUNNING 10.1
WINDING TYPE	INDUCTION-SPLIT PHASE
DUTY CYCLE	CONTINUOUS
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	INCHES 4.375
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	INCHES 3.312
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	INPUT LINE TO LINE LOW 230.0 OR LINE TO LINE HIGH 460.0
GEARED HEAD OUTPUT SHAFT SPEED RATING	SINGLE END SINGLE REVOLUTIONS PER MINUTE 43.800
ANGLE OF SHAFT TO MOUNTING BASE	SINGLE END DEGREES 90.0
SHAFT END CHARACTERISTIC	SINGLE END SINGLE STYLE A9
PHASE	INPUT THREE
FREQUENCY IN HERTZ	60.0
TERMINAL TYPE AND QUANTITY	WIRE LEAD 3
MOUNTING METHOD	FACE
KEYWAY LENGTH	SINGLE END INCHES NOMINAL 1.2500
SHAFT ROTATION DIRECTION	SINGLE END CLOCKWISE OR COUNTERCLOCKWISE
FRAME SIZE DESIGNATION	56C
OVERALL HEIGHT	INCHES 6.500
GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION	SINGLE END ANGLED TO ARMATURE/ROTOR AXIS
OVERALL WIDTH	INCHES 6.906
KEYWAY WIDTH	SINGLE END INCHES NOMINAL 0.1875
KEYWAY DEPTH	SINGLE END INCHES NOMINAL 0.0937
LENGTH OF SHAFT FROM HOUSING	SINGLE END INCHES 2.000
INCLOSURE SPECIFICATION	NEMA

PICA SICA: P
PKG cat: 18ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 32
Container, waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 13.5000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: BAGS SHALL BE FABRICATED

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.