GEARCASE-MOTOR

3010FSC

01NCB code

035-5386Item number

NIIN 01-035-5386

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
KIT40114-02	82974 MUNTERS CORPORATION DBA MUNTERS DES CHAMPS PRODUCTS DIV CARGOCAIRE	A	3	2	5	CX	4	D
VW1A867-10	14112 VON WEISE GEAR CO	H	5	9	5	CX	4	B

OVERALL HEIGHT	INCHES 2.719
OVERALL LENGTH	INCHES 3.262
OVERALL WIDTH	INCHES 3.437
SHAFT DIAMETER	SINGLE END INCHES NOMINAL 0.3120
CURRENT TYPE	INPUT AC
SHAFT ROTATION DIRECTION	SINGLE END CLOCKWISE OR COUNTERCLOCKWISE
DUTY CYCLE	CONTINUOUS
ENCLOSURE FEATURE	OPEN PROTECTED
WINDING TYPE	INDUCTION-SHADED POLE
MOUNTING METHOD	PAD
MOUNTING FACILITY TYPE AND QUANTITY	SLOT 2 AND UNTHREADED HOLE(S) 2
GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION	SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS
COOLING METHOD	SELF-VENTILATED
KEYWAY CENTER TO SHAFT END DISTANCE	SINGLE END INCHES NOMINAL 0.3750
SPEED CONTROL METHOD AND DEVICE TYPE	AUTOMATIC MECHANICAL
INCLOSURE SPECIFICATION	COMMERCIAL
FEATURES PROVIDED	VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
WOODRUFF KEY SIZE DESIGNATION	2
LENGTH OF SHAFT FROM HOUSING	SINGLE END INCHES 0.562
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	INCHES 2.375
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	INCHES 2.275
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	INPUT LINE TO NEUTRAL SINGLE 115.0
GEARED HEAD OUTPUT SHAFT SPEED RATING	SINGLE END SINGLE REVOLUTIONS PER MINUTE 10.000
SHAFT END CHARACTERISTIC	SINGLE END SINGLE STYLE A11
PHASE	INPUT SINGLE
FREQUENCY IN HERTZ	60.0
TERMINAL TYPE AND QUANTITY	WIRE LEAD 2

PICA SICA: P
PKG cat: 41C0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: A
1/4 inch thick
Unit cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 4.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0750
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.