Catalog item
Request a quoteBEARING UNIT,BALL
3130FSC
01NCB code
101-6187Item number
NIIN 01-101-6187
- Unit price
- $85.11
- Unit of issue
- EA
- Source of supply
- SMS
- DEMIL code
- A
Identification
- Item name code
- 30556
- PINC
- 0030556
- Criticality code
- X
- II
- N
- DEMIL code
- A
- NIIN assigned
- 04-OCT-80
- Precious metals indicator
- A
- Hazardous material indicator
- N
- Schedule B export code
- 8482991050
- FedMall
- Y
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Recoverability code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-OCT-2026 | DF | J | SMS | EA | 0.0000 | $85.11 | 1 | U | 0 | N | SF9---N | $0.00 | F |
| 01-OCT-2026 | DN | J | SMS | EA | 0.0000 | $85.11 | 1 | U | 0 | 9B----- | $0.00 | N | |
| 01-OCT-2026 | DS | J | SMS | EA | 0.0000 | $85.11 | 1 | U | 0 | N | ------- | $0.00 | I |
Part numbers
- Part number
- VAS1
- CAGE
- 21335TIMKEN CO DIV THE TIMKEN COMPANY
- CAGE status
- A
- RNCC
- 3
- RNVC
- 1
- Document availability code
- E
- RNAAC
- ZZ
Characteristics
| MOUNTING SLOT WIDTH | INCHES NOMINAL 0.4375 |
|---|---|
| MOUNTING SLOT LENGTH | INCHES NOMINAL 0.8125 |
| BORE DIAMETER | INCHES NOMINAL 1.0000 |
| BASE THICKNESS | INCHES NOMINAL 0.5938 |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 4.1250 |
| HOUSING HEIGHT | INCHES NOMINAL 2.8125 |
| HOUSING WIDTH | INCHES NOMINAL 5.5000 |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| BASE LENGTH | INCHES NOMINAL 1.4062 |
| ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ALIGNMENT TYPE | SELF-ALIGNING |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.6250 |
| SEAL TYPE | CONTACT |
| BLOCK TYPE | FIXED |
| SHAFT END TYPE | OPEN |
| SEAL LOCATION | BOTH ENDS |
| COLLAR LOCATION | ONE END |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.4375 |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| MOUNTING HOLE TYPE | SLOTTED |
| SPECIAL FEATURES | CERTIFIED FREE FROM MERCURY CONTAMINATION |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL | HOUSING IRON CAST |
| MATERIAL | BEARING STEEL |
| MATERIAL | SEAL RUBBER SYNTHETIC |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STYLE DESIGNATOR | |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
MOE rules
| MOE rule | MOE CD | AMC | AMSC | Date assigned | IMC | IMCA | PICA | PICA LOA | SICA | SICA LOA | Auth collab | Fmr MOE rl |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FGGG | DF | 3 | H | 01-SEP-06 | Z | TG | GX | 01 | TG | 5D | GX TU | FGCX |
| N9BG | DN | 3 | H | 01-SEP-06 | Z | GH | GX | 01 | GH | 5D | GX | N9GD |
Service data
Navy
- COG
- 9B
Air Force
- Fund
- SF
- Budget
- 9
- PVC
- N
- ERRC
- N
Freight
- ACTY CD
- KZ
- NMFC
- 114690
- NMFC sub
- Z
- Uniform freight class
- 58770
- Less than truckload
- W
- Water commodity code
- 742
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- VZ
- NMF description
- BALLS/ROLLS BEARING
Packaging
Unit and preservation
- PICA SICA
- P
- PKG cat
- 03AZ
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- TOS
- A
- Intermediate container qty
- 0No intermediate container quantity specified (000)
- Method of preservation
- ZZSpecial requirements apply that are not represented by the code symbols; details are provided with the acquisition...
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- ZZSpecial requirement – See specific instructions or drawings provided
- Wrap mat
- ZZSpecial requirements – see specific instructions or drawings provided
- Cush dun
- ZZSpecial requirements.
- THK
- C3/4 inch thick
- Unit cont
- ZZSpecial requirement – See specific instructions or drawings provided.
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- ZZSpecial requirements
- Inter cont
- ZZSpecial requirement – See specific instructions or drawings provided.
- Lvl A
- EPacking shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
- Lvl b
- QPacking shall be accomplished in accordance with table C-II for the packing level specified.
- Unit pack weight
- 0.0000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 0.0000
- OPI
- MAll packaging data is mandatory for compliance and no substitutions are permitted.
- Supplemental instructions
- ADDITIONAL INFORMATION
Packaging instructions
- PICA SICA
- P
- PKG design ACTY
- 13873
- SPI rev
- Y
- SPI date
- 88090
Related items
Standardization
- Item standardization code
- 5
- Orig stdzn dec
- 97
- Dt stdzn dec
- 04-OCT-1980
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.