WINCH,DRUM,POWER OPERATED

3950FSC

01NCB code

482-3915Item number

NIIN 01-482-3915

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC
SD3255	12437 THERN INC	A	3	2	B	ZZ
4WS6M-S5	12437 THERN INC	A	5	2	B	ZZ

PRIME MOVER QUANTITY	1
END ITEM IDENTIFICATION	WINCH, ASSEMBLY ELECTRIC, WSD: SEAWOLF CLASS SSN
UNPACKAGED UNIT LENGTH	INCHES NOMINAL 33.219
UNPACKAGED UNIT WIDTH	INCHES NOMINAL 22.000
UNPACKAGED UNIT HEIGHT	INCHES NOMINAL 22.500
PRIME MOVER TYPE	ELECTRIC MOTOR
OPERATION METHOD	POWERED
TRAVEL RATE PER MINUTE	FEET 9.0
DRUM SURFACE DESIGN	GROOVED
PART NAME ASSIGNED BY CONTROLLING AGENCY	WINCH, ASSEMBLY ELECTRIC
VOLTAGE IN VOLTS	460.0
PHASE	THREE
SPECIAL FEATURES	NOT INCLUDED W/ ASSEMBLY IS P/N SD3255-2 (B3145), RATIO MULTIPLIER, WINCH; INCLUDED ARE 1-P/N B3721, QTY 1, MOTOR BRK 1.5HP; 2-P/N B3145, QTY: 1, RATIO MULTIPLER 5:1; 3-P/N B3369, QTY: 1, REDUCER MODEL 35 24.67:1; 4-P/N SD3254, QTY 1, WINCH SUBASSEMBLY; 5- P/N A2922, QTY: 8, CAPSCR HESHD .375-16NC X 1.000 ZNPL GR5; 6-P/N A2926, QTY: 8, WASHER HELSPRLK .375; 7-P/N A6877, QTY: 1, SPUR GEAR 21 TEETH; 8-P/N A5113, QTY: 1, KEY .375 X .375 X 2.750 4140 HT BES; 9-P/N A3739, QTY: 1, SETSCR SOKHD NYLK .375-16NC X .500; 10-P/N A4576, QTY: 2, KEY .188 X .188 X 1.500 4140 HT BER, 11-P/N SB5065, QTY: 1, PRESSURE ROLLER BAR ASSEMBLY; 12-P/N 3L4021-S18, QTY: 1, ELECTRICAL CONTROLS; MODEL: 4WS6M-S5; LINE PULL OF THE WINCH AT FIRST LAYER OF WIRE ROPE 3800 LBS., WITH ACCUMULATED 1/2 INCH DIAMETER WIRE ROPE OF 31 FEET, WITH A LOAD TRAVELING SPEED AT 9 FEET PER MINUTE
PROPRIETARY CHARACTERISTICS	PACS

PICA SICA: P
PKG cat: 18ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: 20
Preservative coating
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: AD
Cushion, anchor, block or brace as required.
THK: C
3/4 inch thick
Unit cont: F2
ASTM D6251, Type III, Class 2, overseas cleated plywood box or ASTM-D6880, Class 2, heavy duty nailed wood box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: 00
No requirement.
Lvl A: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Unit pack weight: 0.0000
UP SZ MAXB: 22.00000
UP SZ MAXL: 33.20000
UP SZ MAXH: 22.50000
Unit pack cube: 9.5100
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.