CORD ASSEMBLY,ELASTIC

4020FSC

01NCB code

707-7264Item number

NIIN 01-707-7264

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DM	J	SMS	EA	0.0000	$178.02	1	U	0	Z	1-B2---	$0.00	M
01-OCT-2026	DS	J	SMS	EA	0.0000	$178.02	1	U	0		-------	$0.00	I

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNSC
EOD-SPWRGL1	6VW15 TRAINING CENTER PROS INC DBA EOD GEAR	A	5	2	4	ZZ
SP-6	78HX0 DETONATION TECHNOLOGY LLC	A	3	2	5	ZZ	G

OVERALL DIAMETER	INCHES NOMINAL 4.0
SPECIAL FEATURES	REEL CONSIST OF TWO 4 INCH BY ONE QUARTER INCH THICK CIRCULAR DISKS AND A ROUND REEL CORE THAT IS 1.47 INCH DIAMETER AND 1.3 INCH LONG. THE DISTANCE BETWEEN THE TWO OUTTER 4 INCH DISKS ON EACH SIDE WITH 3 SQUARE DRIVE FLAT HEAD CAP SCREW. THE CENTER OF THE KNOB IS APPROXIMATELY .63 INCHES FROM THE OUTSIDE OF THE 4 INCH DISK. REEL HANDLE IS BLACK IN COLOR. REEL HANDLE IS BLACK IN COLOR. REEL HANDLE SHALL BE 4.7 INCHES BY 1 INCH WITH AN OBLONG HOLE WHERE THE OPERATORS FINGERS WILL GRASP THE HANDLE. THE REEL HANDLE HAS A LINE GUIDE THAT EXTENDS OVER THE 1.3 INCH GAP BETWEEN THE TWO 4 INCH DISKS. THE REEL HANDLE HAS A KNURLED THUMB SCREW THAT PASSES THROUGH THE REEL HANDLE PROVIDING FRICTION ON THE OUTTER EDGE OF THE REEL. THE THUMB SCREW IS INTERCHANGEABLE TO EITHER SIDE OF THE HANDLE. LINE: COLOR IS SUBJEC TO AVAILABILITY. LINE HAS A LOAD BEARING OF AT LEAST 400 POUNDS OR EQUAL. LINE IS ATTACHED CARABINER WITH HEAT SHRINK AROUND THE KNOT.
COLOR	BLACK
MATERIAL	OVERALL STEEL

PICA SICA: P
PKG cat: 16ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.