FAN,TUBEAXIAL

4140FSC

01NCB code

697-5263Item number

NIIN 01-697-5263

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	J	SMS	EA	0.0000	$273.92	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	J	SMS	EA	0.0000	$273.92	1	U	0	-------	$0.00	I

SPEED ADJUSTMENTS	TWO SPEED
OVERALL DEPTH	MILLIMETERS MINIMUM 45.7 AND MILLIMETERS MAXIMUM 46.3
WIDTH	MILLIMETERS MINIMUM 171.0 AND MILLIMETERS MAXIMUM 172.0
LENGTH	MILLIMETERS MINIMUM 50.5 AND MILLIMETERS MAXIMUM 51.5
COOLING MEDIUM	BEARING AIR
OPERATING SPEED AT RATED CAPACITY IN RPM	2800.0 AND 3200.0
END ITEM IDENTIFICATION	CKT 30 SATELLITE
ELECTRICAL CONNECTION TYPE	WIRE LEAD
OUTLET INSIDE DIAMETER	MILLIMETERS NOMINAL 166.0
DRIVE TYPE	DIRECT
PRIME MOVER TYPE	ELECTRIC MOTOR
INCLOSURE TYPE	PARTIALLY INCLOSED
ROTATION DIRECTION FOR WHICH DESIGNED	COUNTERCLOCKWISE
AIR FLOW RATE	CUBIC FEET PER MINUTE MINIMUM 203.0 AND CUBIC FEET PER MINUTE MAXIMUM 239.0
VOLTAGE IN VOLTS AND CURRENT TYPE	AC 115.0
PRIME MOVER POWER RATING	WATTS 25.0 AND WATTS 27.0
HOUSING INSIDE DIAMETER	MILLIMETERS NOMINAL 146.0
SHAFT BEARING TYPE	BALL
FREQUENCY IN HERTZ	50.0 AND 60.0
HEIGHT	MILLIMETERS MINIMUM 150.5 AND MILLIMETERS MAXIMUM 151.5
MATERIAL	HOUSING ALUMINUM ALLOY
STYLE DESIGNATOR

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.