PIPE,PLASTIC

4710FSC

01NCB code

631-7382Item number

NIIN 01-631-7382

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	J	SMS	EA	0.0000	$33.36	1	U	0	Z	J2200X-	$0.00	A
01-OCT-2026	DS	J	SMS	EA	0.0000	$33.36	1	U	0	N	-------	$0.00	I

MATERIAL	PLASTIC, POLYETHYLENE (PP)
SUPPLEMENTARY FEATURES	MINIMUM WORKING TEMPERATURE = MINUS 50 F, MAXIMUM WORKING TEMPERATURE = 80 F
SPECIAL FEATURES	PIPE MATERIAL SHALL BE HIGH DENSITY POLYETHYLENE CONFORMING TO THE MINIMUM REQUIREMENTS OF CELL CLASSIFICATION 345464C AS DEFINED AND DESCRIBED IN ASTM D3350, EXCEPT THAT CARBON BLACK CONTENT SHOULD NOT EXCEED 3-1/2 PERCENT, THE RESIN SHALL HAVE A MATERIAL DESIGNATION CODE OF PE3608
COLOR	BLACK
OPERATING PRESSURE	POUNDS PER SQUARE INCH (PSI) MAXIMUM 125.0
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIPE ABS 1/2"
NOMINAL PIPE SIZE DESIGNATION	MILLIMETERS 12.70
INSIDE DIAMETER	MILLIMETERS NOMINAL 15.79
OUTSIDE DIAMETER	MILLIMETERS NOMINAL 17.32
LENGTH	FEET NOMINAL 100.0
TEST DATA DOCUMENT	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). NSF 14 TO 61

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.