Catalog item
Request a quoteHOSE ASSEMBLY,NONMETALLIC
4720FSC
01NCB code
408-0152Item number
NIIN 01-408-0152
- Unit price
- $171.39
- Unit of issue
- EA
- Source of supply
- SMS
- DEMIL code
- A
Identification
- Item name code
- 20311
- PINC
- 0020311
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- DEMIL integrity code
- 1
- NIIN assigned
- 08-FEB-95
- Precious metals indicator
- A
- Hazardous material indicator
- N
- FedMall
- Y
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Recoverability code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-OCT-2026 | DA | Z | SMS | EA | 0.0000 | $171.39 | 1 | U | W | Z | J2200X- | $0.00 | A |
| 01-OCT-2026 | DS | Z | SMS | EA | 0.0000 | $171.39 | 1 | U | W | N | ------- | $0.00 | I |
Part numbers
Characteristics
| CROSS-SECTIONAL SHAPE STYLE | |
|---|---|
| THREAD CLASS | 2B |
| THREAD DIRECTION | FIRST END RIGHT-HAND |
| INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| TEMP RATING | SINGLE RESPONSE FAHRENHEIT -50.0 AND FAHRENHEIT 250.0 |
| FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.315 |
| OUTSIDE DIAMETER | INCHES NOMINAL 1.500 |
| MINIMUM INSIDE BENDING RADIUS | INCHES 6.000 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.030 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.062 |
| BOLT HOLE QUANTITY | 4 |
| FLANGE LENGTH | SECOND END INCHES MINIMUM 2.720 AND INCHES MAXIMUM 2.780 |
| END ITEM IDENTIFICATION | 3990-01-307-7676 |
| FLANGE WIDTH | SECOND END INCHES NOMINAL 2.220 |
| CONNECTION STYLE | |
| BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.406 |
| END FLANGE CONSTRUCTION | SECOND END SOLID |
| END CONNECTION DESIGN | SECOND END ELBOW |
| END CONNECTION DESIGN | FIRST END STRAIGHT |
| END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING ZINC |
| CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| THREAD QUANTITY PER INCH | 12 |
| BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| NOMINAL THREAD SIZE | FIRST END INCHES 1.438 |
| OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| FLOW ANGLE | SECOND END DEGREES 90.0 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| INSIDE SURFACE CONDITION | SMOOTH |
| MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 27.000 |
| FLANGE STYLE | |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED FABRIC |
| ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| ITEM STRUCTURAL COMPOSITION | FIFTH LAYER SPIRALLY LAID STEEL WIRE |
| ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| THREAD SERIES DESIGNATOR | FIRST END UN |
MOE rules
- MOE rule
- A920
- MOE CD
- DA
- AMC
- 1
- AMSC
- L
- Date assigned
- 01-APR-06
- IMC
- Z
- IMCA
- AZ
- PICA
- GX
- PICA LOA
- 01
- SICA
- CD
- SICA LOA
- 5D
- Auth collab
- GX CD
- Supp collab
- AZ
- Fmr MOE rl
- A181
Service data
Army
- Matcat 1
- J
- Matcat 2
- 2
- Matcat 3
- 2
- Matcat 4 5
- 00
- ARC
- X
Freight
- ACTY CD
- AH
- NMFC
- 157320
- NMFC sub
- Z
- Uniform freight class
- 77803
- Less than truckload
- W
- Water commodity code
- 736
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- VZ
- NMF description
- PLASTIC/RUBBER ARTICLE/ETC VIZ:
Packaging
Unit and preservation
- PICA SICA
- P
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- TOS
- A
- Intermediate container qty
- AAAQuantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
- Method of preservation
- AESeal or plug all openings and preserve by Method 10.
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- 00No requirement
- Wrap mat
- 00No requirement
- Cush dun
- NAPPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
- THK
- A1/4 inch thick
- Unit cont
- D3PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- 32Type I, shelf life
- Inter cont
- DOAny suitable fiber box included in this table may be used (see J.4.9.1).
- Lvl A
- QPacking shall be accomplished in accordance with table C.II for the packing level specified.
- Lvl b
- QPacking shall be accomplished in accordance with table C-II for the packing level specified.
- Unit pack weight
- 1.0000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 0.7650
- OPI
- MAll packaging data is mandatory for compliance and no substitutions are permitted.
Packaging instructions
- PICA SICA
- P
- SPI date
- 00000
Related items
Standardization
- Item standardization code
- 2
- Orig stdzn dec
- AX
- Dt stdzn dec
- 04-APR-1996
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.