HOSE ASSEMBLY,NONMETALLIC

4720FSC

01NCB code

526-4700Item number

NIIN 01-526-4700

Identification

CROSS-SECTIONAL SHAPE STYLE
THREAD CLASS	2B
THREAD DIRECTION	FIRST END RIGHT-HAND
THREAD DIRECTION	SECOND END RIGHT-HAND
INSIDE DIAMETER	INCHES NOMINAL 0.250
TEMP RATING	SINGLE RESPONSE FAHRENHEIT -70.0 AND FAHRENHEIT 212.0
OUTSIDE DIAMETER	INCHES NOMINAL 0.510
MINIMUM INSIDE BENDING RADIUS	INCHES 1.750
END ITEM IDENTIFICATION	VDS MAST
CONNECTION STYLE
END CONNECTION DESIGN	FIRST END STRAIGHT
END CONNECTION DESIGN	SECOND END ELBOW
END FITTING COMPONENT AND MATERIAL	ALL ENDS COMPLETE FITTING STEEL
CONNECTION TYPE	FIRST END THREADED INTERNAL TUBE
CONNECTION TYPE	SECOND END THREADED INTERNAL TUBE
THREAD QUANTITY PER INCH	20
BURST TEST PRESSURE	POUNDS PER SQUARE INCH 12000.0
NOMINAL THREAD SIZE	FIRST END INCHES 0.562
NOMINAL THREAD SIZE	SECOND END INCHES 0.438
OPERATING PRESSURE	LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0
SEAT ANGLE	SECOND END DEGREES 37.0
FLOW ANGLE	SECOND END DEGREES 45.0
CRITICALITY CODE JUSTIFICATION	FEAT
INSIDE SURFACE CONDITION	SMOOTH
MEASURING METHOD AND LENGTH	INCHES NOMINAL WORKING 48.000
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED	SECOND END INCHES 0.250
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED	SECOND END INCHES 0.250
SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-PLASTIC; WEAPON SYSTEM ESSENTIAL; ELASTOMERIC CORE; CLEAN AND CAP ENDS; ATTACHED MARKING PLATE
MEDIA FOR WHICH DESIGNED	SINGLE RESPONSE AIR AND HYDRAULIC FLUID
ITEM STRUCTURAL COMPOSITION	OUTER LAYER POLYESTER
THREAD SERIES DESIGNATOR	FIRST END UNF
THREAD SERIES DESIGNATOR	SECOND END UNF

PICA SICA: P
PKG cat: 16ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: CA
A-A-203, kraft wrapping paper
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: DO
Any suitable fiber box included in this table may be used (see J.4.9.1).
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.