TOOL KIT,FIBER OPTIC SYSTEM

5180FSC

01NCB code

574-5837Item number

NIIN 01-574-5837

Identification

END ITEM IDENTIFICATION	GPETE
PART NAME ASSIGNED BY CONTROLLING AGENCY	CAGE: GROUND TACTICAL QUAD FUSION SPLICING AND GROUND TACTICAL MILITARY/COMMERCIAL FIBER OPTIC TERMINATION KIT
SPECIAL FEATURES	CONTAINS ALL TOOLS NECESSARY TO ACCOMPLISH ALL FROCA (SG) CONNECTORS AND "MILITARY/COMMERCIAL" CONNECTORS INCLUDING 3M HOT MELTS, CORNING UNICAM 9NO EPOXY, NO POLISH), TYCO EPOXY-STYLE, AND LUCENT EPOXY-STYLE CONNECOTRS; KIT SUPPORTS ALL ST, SC ANC LC CONNECTORS FROM EVERY VENDOR; CONTAINS THE QUAL EL FUSION SPLICER THAT FUSION SPLICES FOUR 900-BUFFERED SINGLEMODE OR MULTIMODE TFOCA OR COMMERCIAL FIBERS SIMULTANEOUSLY; ALL SUPPORTING TOOLS WILL STRIP, CLEAVE, FUSE, AND PROTECT 4 FIBERS AT THE SAME TIME; SEPARATE HOLDERS ARE INCLUDED TO SPLICE 250 MICRO FIBERS FOR COMMERCIAL APPLICTIONS; WARFIGHTER CAN FUSION SPLICE ANY KIND OF "PIGTAIL" IN THE BUILDING OR OUTSIDE TFOCA ENVIRONMENT; INCLUDES WATERPROOF MILITARY GRADE CASE WITH PRESSURE RELEASE VALVE
SUPPLEMENTARY FEATURES	A DUAL-PURPOSE OVEN IS REQUIRED TO MELT THE 3M HOT MELTS AND CURE THE EPOXY-STYLE CONNECTORS; A UNIVERSAL CRIMPING TOOL THAT HOLDS SEPARATE CRIMP DIES IS NECESSARY FOR THE VARIOUS CRIMPING SLEEVES SPECIFIED BY EACH MFR

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Unit of issue: EA
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: FA
MIL-P-130, laminated and creped wrapping paper
Cush dun: JC
ASTM D4727/D4727M, domestic fiberboard used as pads, cells, die cuts or sleeves
THK: 0
Not applicable
Unit cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
PKG data source: A

PICA SICA: P
SPC MKG: 24
Open for inspection or use only
Inter cont: 00
No requirement.
UCL: B
Unit container provides level B packing protection.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.