BOLT,INTERNALLY RELIEVED BODY

5306FSC

01NCB code

298-1290Item number

NIIN 01-298-1290

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	V	SMS	EA	0.0000	$3,885.10	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	V	SMS	EA	0.0000	$3,885.10	1	U	0	-------	$0.00	I

THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	INCHES MINIMUM 0.299 AND INCHES MAXIMUM 0.390
FASTENER LENGTH	INCHES MINIMUM 2.520 AND INCHES MAXIMUM 2.550
HEAD STYLE
HEAD HEIGHT	INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290
WIDTH BETWEEN FLATS	INCHES NOMINAL 0.500
SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.100
CONCENTRIC HOLE DEPTH	INCHES MINIMUM 2.390 AND INCHES MAXIMUM 2.410
CONCENTRIC HOLE DIAMETER	INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.129
NOMINAL THREAD DIAMETER	INCHES 0.250
FEATURES PROVIDED	DRY FILM LUBRICANT
THREAD QUANTITY PER INCH	28
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160
SPECIAL FEATURES	TWO SHOULDERS 0.060 IN. MIN; 0.070 IN. MAX LG; 0.3180 IN. MIN; 0.3195 IN. MAX DIA; THREAD END FLATTEN 0.186 IN. MIN; 0.191 IN. MAX DIA; SURFACE FINISH GRIP 63 MICROINCHES; BEARING SURFACE OF HEAD 63 MICROINCH ON TWO SHOULDERS
MATERIAL	OVERALL NICKEL
PRECIOUS MATERIAL AND LOCATION	SILVER OVERALL
PRECIOUS MATERIAL	SILVER
PROPRIETARY CHARACTERISTICS	PACS
SURFACE TREATMENT	OVERALL SILVER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2411
STYLE DESIGNATOR
THREAD SERIES DESIGNATOR	UNF

PICA SICA: P
PKG cat: 27A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: BE
MIL-DTL-117, Type II, Class C, Style 1, medium duty, waterproof, greaseproof, opaque bag.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.3000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0090
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: PACKAGING CODE ZZ/EACH FAS

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.