WASHER,SPRING TENSION

5310FSC

00NCB code

147-9083Item number

NIIN 00-147-9083

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	J	SMS	EA	0.0000	$3.84	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	J	SMS	EA	0.0000	$3.84	1	U	0	-------	$0.00	I

SURFACE FINISH	INNER MICROINCHES 32.0
SURFACE FINISH	BOTTOM MICROINCHES 32.0
TEST DATA DOCUMENT	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 84955--AGNETIC INSECTION KS 208 RATING A
SURFACE TREATMENT	OVERALL CADMIUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL MFR REF SINGLE TREATMENT RESPONSE KS539 FSC-84955
HOLE DIAMETER	INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.443
MATERIAL THICKNESS	INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.032
MATERIAL	OVERALL STEEL
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5529
OUTSIDE DIAMETER	INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.380
OVERALL HEIGHT	INCHES MINIMUM 0.066 AND INCHES MAXIMUM 0.071
SURFACE FINISH	TOP MICROINCHES 32.0
HARDNESS RATING	ROCKWELL C MINIMUM 46.0
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SURFACE FINISH	OUTER MICROINCHES 32.0

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: B
1/2 inch thick
Unit cont: BD
MIL-DTL-117, bag.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.