Catalog item
Request a quotePIN,STRAIGHT,HEADLESS
5315FSC
00NCB code
990-5623Item number
NIIN 00-990-5623
- Unit price
- $1.98
- Unit of issue
- EA
- Source of supply
- SMS
- DEMIL code
- A
Identification
- Item name code
- 02390
- PINC
- 0002390
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- DEMIL integrity code
- 1
- NIIN assigned
- 01-JAN-62
- Precious metals indicator
- A
- ADP equipment code
- 0
- Hazardous material indicator
- N
- FedMall
- Y
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Recoverability code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-OCT-2026 | DA | Z | SMS | EA | 0.0000 | $1.98 | 1 | U | 0 | Z | T2200X- | $0.00 | A |
| 01-OCT-2026 | DN | Z | SMS | EA | 0.0000 | $1.98 | 1 | U | 0 | 9B----- | $0.00 | N | |
| 01-OCT-2026 | DS | Z | SMS | EA | 0.0000 | $1.98 | 1 | U | 0 | N | ------- | $0.00 | I |
Part numbers
- Part number
- MS16556-62
- CAGE
- 96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
- CAGE status
- A
- RNCC
- 2
- RNVC
- 2
- Document availability code
- E
- RNAAC
- XX
- RNFC
- 3
- RNSC
- D
Characteristics
| SHEAR STRENGTH | DOUBLE POUND 28000 |
|---|---|
| SECOND END STYLE | |
| PIN OVERALL LENGTH | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.760 |
| PIN OVERALL DIAMETER | INCHES MINIMUM 0.3759 AND INCHES MAXIMUM 0.3761 |
| FEATURES PROVIDED | CASE-HARDENED |
| MATERIAL | OVERALL STEEL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 16.0 |
| MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25 DEG |
| SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| FIRST END STYLE | |
| FIRST END TAPER LENGTH | INCHES NOMINAL 0.351 |
| HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 47.0 AND ROCKWELL C MAXIMUM 58.0 |
| SECOND END CORNER RADIUS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.125 |
MOE rules
| MOE rule | MOE CD | AMC | AMSC | Date assigned | IMC | IMCA | PICA | PICA LOA | SICA | SICA LOA | Auth collab | Supp collab | Fmr MOE rl |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A919 | DA | 1 | G | 01-MAY-10 | Z | BF | GX | 01 | CD | 5D | CD GX | BF | |
| N9BZ | DN | 1 | G | 01-APR-06 | Z | HD | GX | 01 | GH | 5D | GX | HX | N9ZD |
Service data
Army
- Matcat 1
- T
- Matcat 2
- 2
- Matcat 3
- 2
- Matcat 4 5
- 00
- ARC
- X
Navy
- COG
- 9B
Freight
- ACTY CD
- XX
- NMFC
- 095190
- NMFC sub
- J
- Uniform freight class
- 49790
- Less than truckload
- Q
- Water commodity code
- 713
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- BZ
- NMF description
- HARDWARE, NOI SUB 9
Packaging
Unit and preservation
- PICA SICA
- P
- PKG cat
- ZZZ0
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- TOS
- A
- Intermediate container qty
- AAAQuantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
- Method of preservation
- 10Physical protection
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- 00No requirement
- Wrap mat
- 00No requirement
- Cush dun
- 00No requirement
- THK
- 0Not applicable
- Unit cont
- 10Any suitable container included in this table may be used (see J.4.9.1).
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- 00No special marking
- Inter cont
- ZZSpecial requirement – See specific instructions or drawings provided.
- UCL
- OUnit container is not an acceptable shipping container.
- Lvl A
- EPacking shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
- Lvl c
- Q
- Unit pack weight
- 0.1000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 0.0010
- OPI
- OOptions can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
- Supplemental instructions
- PRESERVATION METHOD CODE
Packaging instructions
- PICA SICA
- P
- SPI rev
- Y
- SPI date
- 00000
Related items
Standardization
- Item standardization code
- 2
- Orig stdzn dec
- KZ
- Dt stdzn dec
- 22-APR-1970
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.