PIN,SHOULDER,HEADLESS

5315FSC

01NCB code

474-3125Item number

NIIN 01-474-3125

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	D	SMS	EA	0.0000	$87.05	1	U	0	Z	T2200X-	$0.00	A
01-OCT-2026	DS	D	SMS	EA	0.0000	$87.05	1	U	0	N	-------	$0.00	I

Part number: 12987586
CAGE: 19200
COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE
CAGE status: A
RNCC: 3
RNVC: 2
Document availability code: A
RNAAC: ZZ

FIRST END STYLE
SECOND END STYLE
SHANK LENGTH	INCHES NOMINAL 3.745
SHOULDER DIAMETER	INCHES MINIMUM 1.238 AND INCHES MAXIMUM 1.243
SHANK DIAMETER	INCHES MINIMUM 0.225 AND INCHES MAXIMUM 0.250
OVERALL LENGTH	INCHES NOMINAL 6.120
HOLE ARRANGEMENT STYLE
FIRST HOLE DIAMETER	INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.256
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	INCHES NOMINAL 0.495
END ITEM IDENTIFICATION	ARMORED MULTI-PURPOSE VEHICLE (AMPV)
SECOND END CORNER RADIUS	INCHES NOMINAL 0.060
FIRST END TAPER LENGTH	INCHES NOMINAL 0.120
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 34.0
FIRST END LOCATION	CHAMFERED END
FIRST END TAPER ANGLE	DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN, LOCKING, SUPPORT
SPECIAL FEATURES	DIMETIONS APPLY AFTER PLATING;BREAK SHARP EDGES;ZINC-NICKEL COAT, TYPE 2, CLASS 2 PER DRAWING12369857;OPTIONAL FINISH, ZINC COAT, TYPE 2, 0.3 MILS THICK MINIMUM;CENTERS PERMISSIBLE;SECOND END IT TAPERS TO 0.675 IN DIAMETER;SECOND END RADIUS AFTER SHANK IS .06 THEN RADIUS OF .12 THEN .06 AT END;5.625 LENGTH FROM CENTER OF HOLE TO SECOND END;SECOND END FIRST DIAMETER IS 1.243 THEN TAPER TO A DIAMETER OF 0.675
MATERIAL	OVERALL STEEL COMP 4330 OR STEEL COMP 4130 OR STEEL COMP 8630
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD 1ST MATERIAL RESPONSE AST-A322 OR ASSN STD 2ND MATERIAL RESPONSE AST-A331
STYLE DESIGNATOR

MOE rule	MOE CD	AMC	AMSC	Date assigned	IMC	IMCA	PICA	PICA LOA	SICA	SICA LOA	Auth collab	Supp collab	Fmr MOE rl
YR01	YR			01-OCT-24			YR	81			YR
A919	DA	1	G	01-JUN-05	Z	BF	GX	01	CD	5D	CD GX	BF AZ	A187

PICA SICA: P
PKG cat: 27A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.9000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0160
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.