PIN,STRAIGHT,HEADLESS

5315FSC

01NCB code

520-7454Item number

NIIN 01-520-7454

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNSC
KJS148900B-101A	50632 KAMATICS CORPORATION	A	5	2	5	ZZ
4J33230-101	50632 KAMATICS CORPORATION	A	5	9	5	ZZ	B
4J33230-101A	98897 LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY	A	3	2	1	ZZ	D

FIRST END STYLE
SECOND END STYLE
PIN OVERALL LENGTH	INCHES NOMINAL 4.157
PIN OVERALL DIAMETER	INCHES MINIMUM 1.3390 AND INCHES MAXIMUM 1.3998
END ITEM IDENTIFICATION	NHA 4J40101, USED ON MA0001A
FIRST END TAPER LENGTH	INCHES NOMINAL 0.040
SECOND END TAPER LENGTH	INCHES NOMINAL 0.070
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
FIRST END TAPER ANGLE	DEGREES NOMINAL 45.0
SURFACE FINISH	OUTSIDE DIAMETER MICROINCHES 125.0
SECOND END TAPER ANGLE	DEGREES NOMINAL 45.0
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN-FLAP ATTACHMENT, UPPER
SPECIAL FEATURES	1ST END INTERNAL THREADS 0.338/.331 DIA-.59 DEEP, CSK 100 DEG X .41 DIA, 3/8 - 24 UNF-3B .38 DEEP; SECOND END 1.400 LENGTH, 0.749 IN MIN AND 0.758 IN MAX DIA; THRU SLOT HOLE 0.300 WIDE, 0.191 IN TO 0.198 IN MAX HEIGHT, 1.330 IN FROM SECOND END; FINISH G-53, INTERNAL THREADS AND HOLES SHOULD BE COATED WITH ZINC PHOSPHATE BY IMMERSION PER STP 58-302, TYPE 1, CL 2 AND OVERCOAT SOLID FILM LUBRICANT APPLIED PER STP 62-005, TYPE IV, SIDES AND ENDS OF PIN COATED WITH KARON-TYPE B OR EQUIVALENT (KAMATICS CORP, BLOOMFIELD, CT
MATERIAL	OVERALL STEEL
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6532

PICA SICA: P
PKG cat: 27A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: A1
Bags made of material conforming to MIL-P-130, or any bag authorized by MIL-DTL-117.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 1.6000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0390
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.