PIN,STRAIGHT,HEADED

5315FSC

01NCB code

680-3667Item number

NIIN 01-680-3667

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	Z	SMS	EA	0.0000	$12.23	1	U	0	Z	T2200X-	$0.00	A
01-OCT-2026	DS	Z	SMS	EA	0.0000	$12.23	1	U	0		-------	$0.00	I

Part number: MS35810-18
CAGE: 96906
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE status: A
RNCC: 2
RNVC: 2
Document availability code: E
RNAAC: ZZ

END ITEM IDENTIFICATION	01-626-9881
PIN CHAMFER ANGLE	DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 45.0
PIN HEAD DIAMETER	INCHES NOMINAL 0.938
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN, STRAIGHT, HEADED (CLEVIS PIN)
HEIGHT	INCHES NOMINAL 0.250
MATERIAL	OVERALL STEEL
SURFACE TREATMENT	OVERALL ZINC
STYLE DESIGNATOR
FIRST HOLE DIAMETER	INCHES MINIMUM 0.167 AND INCHES MAXIMUM 0.182
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	INCHES NOMINAL 0.187
UNDER HEAD LENGTH	INCHES NOMINAL 1.906
HOLE ARRANGEMENT STYLE
HEAD STYLE
DIAMETER	INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.746

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 31
Waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: BL
MIL-DTL-117, Type III, Class B, Style 2, light duty, waterproof, transparent bag.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
UCL: O
Unit container is not an acceptable shipping container.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: Q
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.