PIN,SHOULDER,HEADLESS

5315FSC

01NCB code

693-5946Item number

NIIN 01-693-5946

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	J	SMS	EA	0.0000	$4,359.48	1	U	0	Z	T2200X-	$0.00	A
01-OCT-2026	DS	J	SMS	EA	0.0000	$4,359.48	1	U	0		-------	$0.00	I

THREAD LENGTH	INCHES MINIMUM 1.970 AND INCHES MAXIMUM 2.010
SHANK LENGTH	INCHES NOMINAL 7.830
SHOULDER DIAMETER	INCHES MINIMUM 3.931 AND INCHES MAXIMUM 3.940
SHANK DIAMETER	INCHES MINIMUM 2.282 AND INCHES MAXIMUM 2.292
OVERALL LENGTH	INCHES MINIMUM 30.790 AND INCHES MAXIMUM 30.830
THIRD STEP DIAMETER	INCHES MINIMUM 3.931 AND INCHES MAXIMUM 3.940
SPECIAL FEATURES	CENTER SHOULDER CHAMFER 2X 10.0 DEGREE X 0.79 INCH LENGTH; THREADED HOLE SEAL PRIOR TO OR AFTER ASSEMBLY, SEAL WITH POLYURETHANE SEALANT SIKAFLEX-221, CAGE CODE; 0PMN0
MATERIAL	OVERALL STEEL COMP 4130 OR STEEL COMP 4140
FIRST END STYLE
THREAD QUANTITY PER INCH	8
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
NOMINAL THREAD SIZE	INCHES 1.000
SECOND SHANK DIAMETER	INCHES MINIMUM 2.982 AND INCHES MAXIMUM 2.992
FIRST END LOCATION	BOTH ENDS
FIRST END TAPER ANGLE	DEGREES NOMINAL 45.0
SECOND SHANK LENGTH	INCHES NOMINAL 7.830
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN, TONGUE, MACHINING
THREAD CLASS	2B
THREAD DIRECTION	RIGHT-HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S-C-26074 CLASS 2, GRADE A
STYLE DESIGNATOR
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
PROPRIETARY CHARACTERISTICS	PACS
SURFACE TREATMENT	OVERALL NICKEL
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC 1ST MATERIAL RESPONSE SAE 4130 OR FED SPEC 2ND MATERIAL RESPONSE SAE 4140
THIRD STEP LENGTH	INCHES MINIMUM 1.970 AND INCHES MAXIMUM 2.010
END ITEM IDENTIFICATION	015457365

MOE rule	MOE CD	AMC	AMSC	Date assigned	IMC	IMCA	PICA	PICA LOA	SICA	SICA LOA	Auth collab	Supp collab
ZA01	ZA			01-SEP-22			ZA	81			ZA
A919	DA	3	B	01-FEB-21	Z	AZ	GX	01	CD	5D	CD GX	AZ

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 33
Greaseproof-waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: BV
MIL-DTL-117, Type III, Class C, Style 1, light duty, waterproof, greaseproof, opaque bag.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.