SEAL,NONMETALLIC STRIP

5330FSC

01NCB code

506-5234Item number

NIIN 01-506-5234

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DF	J	SMS	EA	0.0000	$82.02	1	U	0	N	SF9---N	$0.00	F
01-OCT-2026	DS	J	SMS	EA	0.0000	$82.02	1	U	0	N	-------	$0.00	I

CROSS-SECTIONAL SHAPE STYLE
APERTURE WIDTH	INCHES MINIMUM 0.036 AND INCHES MAXIMUM 1.400
APERTURE LENGTH	INCHES MINIMUM 10.350 AND INCHES MAXIMUM 10.390
CROSS-SECTIONAL HEIGHT	INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.182
CROSS-SECTIONAL WIDTH	INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.550
END ITEM IDENTIFICATION	AN/ALM - 289 HM
CONSTRUCTION	ONE-PIECE
PART NAME ASSIGNED BY CONTROLLING AGENCY	GASKET, LRUI15 PLENUM
SPECIAL FEATURES	OUTSIDE LENGTH IS 11.50 INCHES (IN.) NOMINAL; OUTSIDE WIDTH IS 1.50 IN. NOMINAL; THIS GASKET HAS 4 HOLES WITH A 0.190 IN. DIAMETER THRU, THE HOLES ARE 11.20 IN. FROM CENTER TO CENTER (C TO C) ALONG THE LENGTH AND 1.00 IN. FROM C TO C ALONG THE WIDTH; THIS IS MADE FROM A SILICON RUBBER SPONGE, SHEET 0.175 IN. THICK WITH A SELF ADHESIVE BACKING
MATERIAL	OVERALL RUBBER SILICONE CLASS Q
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL MIL STD SINGLE MATERIAL RESPONSE -IL--51432A
PROPRIETARY CHARACTERISTICS	PACS
STYLE DESIGNATOR

PICA SICA: P
PKG cat: 45A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 33
Greaseproof-waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: JB
ASTM D4727/D4727M, domestic fiberboard used as a stiffener on both sides of item
THK: A
1/4 inch thick
Unit cont: BV
MIL-DTL-117, Type III, Class C, Style 1, light duty, waterproof, greaseproof, opaque bag.
PKG data source: P

PICA SICA: P
SPC MKG: 20
Do not bend
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.