BRACKET,MOUNTING

5340FSC

01NCB code

105-6455Item number

NIIN 01-105-6455

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	J	SMS	EA	0.0000	$121.87	1	U	0	Z	T2200X-	$0.00	A
01-OCT-2026	DS	J	SMS	EA	0.0000	$121.87	1	U	0	N	-------	$0.00	I

END ITEM IDENTIFICATION	FOR 1-4TON TRAILERS/CHASSIS
SPECIAL FEATURES	STEEL,CARBON 1020,COND A SPEC QQ-S-631. PART NO. 19207-11588261 CONSISTS OF BAR 19207-11652454 WHICH IS FLAT AND BAR 19207-11652455 WHICH IS BENT AT AN ANGLE. BOTH BARS HAVE 1.500 RADIUS ON THE ENDS. THE FINISHED DIMENSIONSOF BOTH BARS AFTER BENDING IS 6.500 IN. LG; 2.500 IN. W; 0.250 IN. THK; THE BARS ARE WELDED TOGETHER. ON THE RIGHTSIDE WHERE THE BARS FORM A STEP THERE IS A 0.250 IN. HOLE DRILLED IN LINE THROUGH BOTH BARS; CENTERED ON THE WIDTHAND 1.250 IN. IN FROM THE RIGHT END. ON THE LEFT SIDE WHERE THE BARS ARE WELDED,THERE ARE THREE 0.250 IN. HOLES DRILLED; ONE IS CENTERED ON THE WIDTH AND 0.620 IN. FROM THE LEFT SIDE. THE OTHER TWO HOLES ARE 0.620 IN. FROM THE CENTER LINE AND 2.000 IN. FROM THE LEFTSIDE

PICA SICA: P
PKG cat: 41CZ
Unpackaged weight: 2.4000
Unpackaged width: 2.500
Unpackaged length: 6.500
Unpackaged height: 2.200
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
UCL: B
Unit container provides level B packing protection.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: U
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping...
Unit pack weight: 2.6000
UP SZ MAXB: 2.80000
UP SZ MAXL: 7.30000
UP SZ MAXH: 2.50000
Unit pack cube: 0.0320
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.