CLEVIS,ROD END

5340FSC

01NCB code

230-0138Item number

NIIN 01-230-0138

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	J	SMS	EA	0.0000	$488.49	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	J	SMS	EA	0.0000	$488.49	1	U	0	-------	$0.00	I

THREAD CLASS	3B
THREAD DIRECTION	ROD CONNECTION RIGHT-HAND
THREAD LENGTH	ROD CONNECTION INCHES NOMINAL 0.450
HOLE DIAMETER	INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2505
OVERALL HEIGHT	INCHES NOMINAL 0.500
OVERALL WIDTH	INCHES NOMINAL 0.631
ANGLE HEIGHT	INCHES NOMINAL 0.120
METALLIC HARDNESS RATING	MINIMUM ROCKWELL C 40.0 AND MAXIMUM ROCKWELL C 45.0
FORK SPAN WIDTH	INCHES MINIMUM 0.416 AND INCHES MAXIMUM 0.418
SECURING PIN HOLE DIAMETER	INCHES NOMINAL 0.050
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END	INCHES NOMINAL 0.190
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END	INCHES NOMINAL 1.170
FORK ARM THICKNESS	INCHES MINIMUM 0.102 AND INCHES MAXIMUM 0.112
FORK DEPTH	INCHES NOMINAL 0.720
NOMINAL THREAD SIZE	ROD CONNECTION INCHES 0.3125
ANGLE	DEGREES NOMINAL 45.0
MATERIAL	OVERALL STEEL COMP 630 AND STEEL COMP XM-12
MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 5643,17-4H OR ASSN STD 2ND MATERIAL RESPONSE A-S 5659
PROPRIETARY CHARACTERISTICS	PACS
SURFACE TREATMENT	OVERALL PASSIVATE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL MFR REF SINGLE TREATMENT RESPONSE -22,NEU-O DYNA-ICS COR
STYLE DESIGNATOR
THREAD SERIES DESIGNATOR	ROD CONNECTION UNIFIED NATIONAL JOINT FINE (UNJF)

PICA SICA: P
PKG cat: 60AZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.