BRACKET,DOUBLE ANGLE

5340FSC

01NCB code

616-2148Item number

NIIN 01-616-2148

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DF	J	SMS	EA	0.0000	$209.97	1	U	0	N	SF9MM-N	$0.00	F
01-OCT-2026	DS	J	SMS	EA	0.0000	$209.97	1	U	0	N	-------	$0.00	I

Part number: 11018G0101
CAGE: 01365
MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE
CAGE status: A
RNCC: 3
RNVC: 2
Document availability code: C
RNAAC: ZZ

MOUNTING HOLE TYPE	THREADED
FIRST LEG LENGTH	INCHES NOMINAL 2.00
SECOND LEG LENGTH	INCHES NOMINAL 2.00
END ITEM IDENTIFICATION	MRAP BUFFALO MK2A2
FIRST LEG THICKNESS	INCHES NOMINAL 0.125
SECOND LEG THICKNESS	INCHES NOMINAL 0.125
CENTER SECTION HEIGHT	INCHES NOMINAL 14.65
CENTER SECTION WIDTH	INCHES NOMINAL 11.00
CENTER SECTION THICKNESS	INCHES NOMINAL 0.125
FIRST LEG WIDTH	INCHES NOMINAL 8.00
FIRST LEG CORNER RADIUS	INCHES NOMINAL 0.13
FIRST LEG STYLE
HOLE QUANTITY	24
SECOND LEG RELATIONSHIP TO FIRST LEG	IDENTICAL
FIRST LEG ANGLE	RADIANS NOMINAL 0.13
SECOND LEG ANGLE	RADIANS NOMINAL 0.13
SPECIAL FEATURES	SURFACE TREATMENT - 1 COAT EPOXY PRIMER AND 2 COATS POLYURETHANE CHEMICAL AGENT RESISTANT COATING; BOTH LEG HOLE ARRANGEMENTS ARE IDENTICAL WITH 8 SLOTS ON EACH LEG, SLOTS ARE 0.32" WIDE BY APPRX. 0.50" LONG, EACH ARE 1" APART STARTING AT 0.38" ON CENTER FROM BOTTOM; 8 HOLES ON TOP OF BRACKET ARE 0.27" IN DIAMETER
MATERIAL	ALUMINUM ALLOY 5052
STYLE DESIGNATOR

PICA SICA: P
PKG cat: 16Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.