BRACKET,MULTIPLE ANGLE

5340FSC

01NCB code

642-3017Item number

NIIN 01-642-3017

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	J	SMS	EA	0.0000	$272.87	1	U	0	Z	T2200X-	$0.00	A
01-OCT-2026	DS	J	SMS	EA	0.0000	$272.87	1	U	0	N	-------	$0.00	I

CENTER SECTION WIDTH	INCHES NOMINAL 1.250
MATERIAL DOCUMENT AND CLASSIFICATION	ASSN STD SINGLE MATERIAL RESPONSE AST- A36 OR ASSN STD SINGLE MATERIAL RESPONSE AST- A572
MOUNTING HOLE DIAMETER	INCHES NOMINAL 0.380
MOUNTING HOLE TYPE	PLAIN
BASE THICKNESS	INCHES NOMINAL 0.188
INSIDE WIDTH	INCHES NOMINAL 2.380
FIRST LEG LENGTH	INCHES NOMINAL 1.130
CENTER SECTION THICKNESS	INCHES NOMINAL 0.188
TOP SECTION WIDTH	INCHES NOMINAL 1.250
OVERALL LENGTH	INCHES NOMINAL 6.000
OVERALL HEIGHT	INCHES NOMINAL 1.410
OVERALL WIDTH	INCHES NOMINAL 1.250
MATERIAL THICKNESS	INCHES NOMINAL 0.188
FIRST LEG ANGLE	DEGREES NOMINAL 0.2
SECOND LEG ANGLE	DEGREES NOMINAL 0.2
PART NAME ASSIGNED BY CONTROLLING AGENCY	BRACKET, CLAMP
DISTANCE FROM END TO LEG ALONG LENGTH	INCHES NOMINAL 1.130
MATERIAL	STEEL
SECOND LEG LENGTH	INCHES NOMINAL 1.130
END ITEM IDENTIFICATION	2355-01-616-9288 MINE RESISTANT VEHICLE
FIRST LEG THICKNESS	INCHES NOMINAL 0.188
SECOND LEG THICKNESS	INCHES NOMINAL 0.188
CENTER SECTION HEIGHT	INCHES NOMINAL 1.410
DISTANCE BETWEEN HOLE CENTERS	INCHES NOMINAL 5.000
PROPRIETARY CHARACTERISTICS	PACS
STYLE DESIGNATOR
ANGLE	DEGREES NOMINAL 0.2
HOLE QUANTITY	2

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: JB
ASTM D4727/D4727M, domestic fiberboard used as a stiffener on both sides of item
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.