HINGE,BUTT

5340FSC

01NCB code

653-6865Item number

NIIN 01-653-6865

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DM	J	SMS	EA	0.0000	$19.26	1	U	0	Z	1-B2---	$0.00	M
01-OCT-2026	DS	J	SMS	EA	0.0000	$19.26	1	U	0	N	-------	$0.00	I

MATERIAL THICKNESS	MILLIMETERS NOMINAL 10.4
MOUNTING HOLE DIAMETER	MILLIMETERS MINIMUM 5.4 AND MILLIMETERS MAXIMUM 5.6
MOUNTING HOLE QUANTITY	4
BODY WIDTH	MILLIMETERS MINIMUM 50.0 AND MILLIMETERS MAXIMUM 52.0
END ITEM IDENTIFICATION	5895-01-577-3173
PERFORMANCE TYPE	NOT RATED
PIN REMOVABILITY	NONREMOVABLE
KNUCKLE QUANTITY	2
PIN CENTER TO BODY EDGE DISTANCE	MILLIMETERS NOMINAL 28.5
KNUCKLE TYPE	FRICTION
PART NAME ASSIGNED BY CONTROLLING AGENCY	POSITION CONTROL DETENT HINGE
SPECIAL FEATURES	RADIAL LOAD PERFORMANCE:MAX STATIC LOAD IS 450 N (100 LBF),AVERAGE ULTIMATE LOAD IS 2600 N (575 LBF);AXIAL LOAD PERFORMANCE:MAX STATIC LOAD IS 450 N (100 LBF) AND AVERAGE ULTIMATE LOAD IS 1800 N (400 LBF);CYCLE LIFE RATING FOR STAINLESS STEEL IS UP TO 5000;OPERATING TEMPERATURE RANGE IS -40C (-40F) TO 80C (180F);MOUNTING HOLES ARE DESIGNED TO ACCOMODATE M5 (NO.10) MOUNTING HARDWARE WITH A MAX HEAD DIAMETER OF 10.1MM (0.40") AND A MAX HEAD HEIGHT OF 4MM (0.16");HINGE HAS AN 80 DEGREE DOOR HOLD POSITION BUT CAN BE ADJUSTED TO 180 DEGREES
MATERIAL	SPRING STEEL CORROSION RESISTING
STYLE DESIGNATOR

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.