Catalog item
Request a quoteSPACER,PLATE
5365FSC
01NCB code
343-4178Item number
NIIN 01-343-4178
- Unit price
- $79.05
- Unit of issue
- EA
- Source of supply
- F77
- DEMIL code
- A
Identification
- Item name code
- 26979
- PINC
- 0026979
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- DEMIL integrity code
- 1
- NIIN assigned
- 13-AUG-91
- Precious metals indicator
- A
- Hazardous material indicator
- N
- Schedule B export code
- 7616995195
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Recoverability code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-MAY-2010 | DF | J | F77 | EA | 0.0000 | $79.05 | 0 | U | 0 | N | --SBA-N | $0.00 | F |
| 01-MAY-2010 | DF | J | F77 | EA | 0.0000 | $79.05 | 0 | U | 0 | N | --SBA-N | $0.00 | I |
Part numbers
- Part number
- 17P3A2415-1
- CAGE
- 88277THE BOEING COMPANY
- CAGE status
- A
- RNCC
- 3
- RNVC
- 2
- Document availability code
- A
- RNAAC
- KZ
Characteristics
| HOLE DIAMETER | INCHES NOMINAL 0.625 |
|---|---|
| OVERALL LENGTH | INCHES NOMINAL 0.625 |
| OVERALL WIDTH | INCHES NOMINAL 1.490 |
| OUTSIDE CORNER RADIUS | INCHES NOMINAL 0.130 |
| OVERALL THICKNESS | INCHES NOMINAL 0.125 |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.920 |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | INCHES NOMINAL 0.745 |
| BOLT HOLE QUANTITY | 3 |
| FEATURES PROVIDED | NONSEPARABLE |
| SPECIAL FEATURES | ONE OUTSIDE CORNER HAS NOMINAL RADIUS OF 0.630 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND BOLT HOLES IS 1.800 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD BOLT HOLES IS 2.200 IN. |
| MATERIAL | ALUMINUM ALLOY 7075 |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 13,T6 |
| SURFACE TREATMENT | CHROMATE AND ANODIZE AND PLASTIC EPOXY AND PLASTIC POLYAMIDE AND PLASTIC POLYURETHANE |
| STYLE DESIGNATOR |
MOE rules
- MOE rule
- FBB5
- MOE CD
- DF
- AMC
- 3
- AMSC
- H
- Date assigned
- 01-NOV-04
- IMC
- B
- PICA
- TB
- PICA LOA
- 06
- Auth collab
- TU TB
- Fmr MOE rl
- FXCX
Service data
Air Force
- Budget
- S
- MMAC
- BA
- PVC
- N
- ERRC
- N
Freight
- ACTY CD
- KH
Packaging
Unit and preservation
- PICA SICA
- P
- PKG cat
- 27A0
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- Intermediate container qty
- AAAQuantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
- Method of preservation
- 10Physical protection
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- 00No requirement
- Wrap mat
- 00No requirement
- Cush dun
- 00No requirement
- THK
- 0Not applicable
- Unit cont
- 10Any suitable container included in this table may be used (see J.4.9.1).
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- 00No special marking
- Inter cont
- D3PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
- Lvl A
- EPacking shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
- Lvl b
- QPacking shall be accomplished in accordance with table C-II for the packing level specified.
- Unit pack weight
- 0.0000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 0.0000
- OPI
- OOptions can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Packaging instructions
- PICA SICA
- P
- PKG design ACTY
- 13873
- SPI date
- 00000
Related items
Standardization
- Item standardization code
- 5
- Orig stdzn dec
- 97
- Dt stdzn dec
- 13-AUG-1991
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.