BUSHING,MACHINE THREAD

5365FSC

01NCB code

423-6022Item number

NIIN 01-423-6022

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DF	Z	SMS	EA	0.0000	$34.30	1	U	0	N	SF9AH-N	$0.00	F
01-OCT-2026	DS	Z	SMS	EA	0.0000	$34.30	1	U	0	N	-------	$0.00	I

OVERALL LENGTH	INCHES NOMINAL 1.870
END ITEM IDENTIFICATION	LGM30G,MINUTEMAN III MISSILE
HOLE INSIDE DIAMETER	INCHES NOMINAL 0.625
THREAD QUANTITY PER INCH	12
NOMINAL THREAD SIZE	INCHES 1.500
SPECIAL FEATURES	THREAD DIRECTION RIGHT HAND; WRENCHING FACILITY SHAPE - HEXAGONAL; SCREW THREAD LENGTH 1.370 INCHES; WIDTH ACROSS THE FLATS 0.097 MIN TO 1.00 MAX; COUNTERBORE AND COUNTERSUNK FEATURES NOT INCLUDED; INCLUDES 2 NYLOK INSERTS(P/N 9512605-05) 0.310 IN LONG AND 0.250 IN DIA. WHICH ARE PRESS FIT INTO BUSHING (P/N 9512605-01); HOLES FOR INSERTS ARE LOCATED AT 90 DEG ANGLE FROM EACH OTHER, 0.250 IN DIA AND 0.310 IN DEEP AND ON THREADED PART OF BUSHING 0.250 IN FROM END CLOSEST TO WRENCHING HEX END; TO WRENCHING HEX END; ORIGINAL NAME - BUSHING
MATERIAL	PLASTIC
MATERIAL DOCUMENT AND CLASSIFICATION	FED SPEC SINGLE MATERIAL RESPONSE L--410
THREAD SERIES DESIGNATOR	UNF

PICA SICA: P
PKG cat: 27A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: A
1/4 inch thick
Unit cont: BD
MIL-DTL-117, bag.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.