RESISTOR,VARIABLE,NONWIRE WOUND,

5905FSC

00NCB code

174-2174Item number

NIIN 00-174-2174

Identification

BODY LENGTH	INCHES MAXIMUM 0.625
MAXIMUM STOP TORQUE	INCH-OUNCES 192.00
NONTURN DEVICE RADIUS	INCHES MINIMUM 0.526 AND INCHES MAXIMUM 0.536
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION	1.500
SCREW THREAD DIAMETER	INCHES NOMINAL 0.375
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD QUANTITY PER INCH	32.0
MOUNTING METHOD	STANDARD BUSHING
ELECTRICAL RESISTANCE PER SECTION	KILOHMS SINGLE SECTION 300.0
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	NOMINAL 312.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	SINGLE SECTION 120.0
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
MAXIMUM STARTING TORQUE	INCH-OUNCES 6.00
OVERALL DIAMETER	INCHES MAXIMUM 1.484
SHAFT STYLE
ACTUATOR TYPE	SINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	NOMINAL 312.0
SECTION QUANTITY	1
BODY STYLE
RELIABILITY INDICATOR	NOT ESTABLISHED
OVERALL LENGTH	INCHES NOMINAL 1.250
BODY DIAMETER	INCHES MAXIMUM 1.156
SHAFT DIAMETER	INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250
SHAFT LENGTH	INCHES NOMINAL 0.625
MOUNTING BUSHING LENGTH	INCHES NOMINAL 0.500
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	SINGLE SECTION 70.0
TERMINAL TYPE AND QUANTITY	TAB, SOLDER LUG 3
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
POWER DISSIPATION RATING PER SECTION IN WATTS	HEAT SINK SINGLE SECTION 2.25
RESISTANCE TOLERANCE PER SECTION IN PERCENT	SINGLE SECTION -10.0 TO 10.0

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 0
No requirement.
Pres mat: 00
No requirement
Wrap mat: DA
A-A-1249, paper, tissue
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.