RESISTOR,VARIABLE,WIRE WOUND,PRE

5905FSC

00NCB code

810-5501Item number

NIIN 00-810-5501

Identification

MOUNTING BUSHING LENGTH	INCHES NOMINAL 0.250
RESISTANCE TOLERANCE PER SECTION IN PERCENT	SINGLE SECTION -5.0 TO 5.0
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
BODY DIAMETER	INCHES NOMINAL 0.312
SHAFT DIAMETER	INCHES NOMINAL 0.250
SHAFT STYLE
ACTUATOR TYPE	SINGLE SHAFT
SHAFT LENGTH	INCHES NOMINAL 0.500
SECTION QUANTITY	1
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION	SINGLE SECTION -0.50 TO 0.50
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	SINGLE SECTION 125.0
TERMINAL LOCATION	LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
POWER DISSIPATION RATING PER SECTION IN WATTS	FREE AIR SINGLE SECTION 3.0
SCREW THREAD SERIES DESIGNATOR	UNEF
BODY STYLE
TERMINAL TYPE AND QUANTITY	TAB, SOLDER LUG 3
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	NOMINAL 3600.0
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
BODY LENGTH	INCHES NOMINAL 0.438
SCREW THREAD QUANTITY PER INCH	32.0
RELIABILITY INDICATOR	NOT ESTABLISHED
MOUNTING METHOD	STANDARD BUSHING
FEATURES PROVIDED	HUMIDITY PROOF
ELECTRICAL RESISTANCE PER SECTION	KILOHMS SINGLE SECTION 50.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	SINGLE SECTION 40.0
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	NOMINAL 3600.0
SCREW THREAD DIAMETER	INCHES NOMINAL 0.375

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: DA
A-A-1249, paper, tissue
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 1.8000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0030
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.