RESISTOR,VARIABLE,NONWIRE WOUND,

5905FSC

00NCB code

918-0488Item number

NIIN 00-918-0488

Identification

SECTION QUANTITY	1
TERMINAL LOCATION	LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
POWER DISSIPATION RATING PER SECTION IN WATTS	FREE AIR SINGLE SECTION 1.0
OVERALL LENGTH	INCHES NOMINAL 1.245
BODY DIAMETER	INCHES NOMINAL 0.875
SHAFT DIAMETER	INCHES NOMINAL 0.125
SHAFT LENGTH	INCHES NOMINAL 0.688
MOUNTING BUSHING LENGTH	INCHES NOMINAL 0.312
SHAFT STYLE
ACTUATOR TYPE	SINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	NOMINAL 1080.0
MAXIMUM STARTING TORQUE	INCH-OUNCES 0.60
MAXIMUM RUNNING TORQUE	INCH-OUNCES 0.60
MAXIMUM STOP TORQUE	INCH-OUNCES 48.00
TERMINAL TYPE AND QUANTITY	TURRET 2 AND TAB, SOLDER LUG 1
SHAFT RADIAL PLAY	INCHES 0.003
SCREW THREAD DIAMETER	INCHES NOMINAL 0.250
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD QUANTITY PER INCH	32.0
BODY LENGTH	INCHES NOMINAL 0.557
OVERALL DIAMETER	INCHES MAXIMUM 1.260
ELECTRICAL RESISTANCE PER SECTION	KILOHMS SINGLE SECTION 10.0
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	NOMINAL 1080.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	SINGLE SECTION 105.0
SHAFT END PLAY	INCHES 0.00500
BODY STYLE
RELIABILITY INDICATOR	NOT ESTABLISHED
MOUNTING METHOD	STANDARD BUSHING
RESISTANCE TOLERANCE PER SECTION IN PERCENT	SINGLE SECTION -10.0 TO 10.0
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	SINGLE SECTION 70.0
SHAFT BEARING TYPE	SLEEVE
SHAFT RUNOUT	INCHES 0.002

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 0
No requirement.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.2000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0090
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.