RESISTOR,VARIABLE,NONWIRE WOUND,

5905FSC

01NCB code

032-1815Item number

NIIN 01-032-1815

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
2100-2773	1LQK8 KEYSIGHT TECHNOLOGIES, INC.	R	3	9	5	ZZ
2100-2773	28480 HEWLETT-PACKARD COMPANY DBA HP	A	5	9	1	TX	1	B
2100-2773	7ZXR5 KEYSIGHT TECHNOLOGIES INC	A	3	2	5	ZZ
GS4N040P502MA	01121 ROCKWELL AUTOMATION, INC. DBA ROCKWELL AUTOMATION	A	5	9	3	TX	4	B

SECTION QUANTITY	1
BODY STYLE
RELIABILITY INDICATOR	NOT ESTABLISHED
BODY DIAMETER	INCHES MAXIMUM 0.516
SHAFT DIAMETER	INCHES NOMINAL 0.125
SHAFT LENGTH	INCHES NOMINAL 0.625
MOUNTING BUSHING LENGTH	INCHES NOMINAL 0.375
BODY LENGTH	INCHES MAXIMUM 0.469
SHAFT STYLE
SWITCH TYPE	ROTARY
SWITCH VOLTAGE RATING IN VOLTS	125.0 AND 28.0
ACTUATOR TYPE	SINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	NOMINAL 275.0
SWITCH CONTACT ARRANGEMENT	SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SCREW THREAD DIAMETER	INCHES NOMINAL 0.250
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD QUANTITY PER INCH	32.0
OPERATING POSITION	START OF ROTATION
MOUNTING METHOD	STANDARD BUSHING
FEATURES PROVIDED	SWITCH
ELECTRICAL RESISTANCE PER SECTION	KILOHMS SINGLE SECTION 5.0
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	NOMINAL 275.0
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT	-25 DEG CELSIUS SINGLE SECTION 0.0 TO 3.0 AND 85 DEG CELSIUS SINGLE SECTION -2.0 TO 2.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	SINGLE SECTION 120.0
TERMINAL LOCATION	REAR-BOTTOM
POWER DISSIPATION RATING PER SECTION IN WATTS	FREE AIR SINGLE SECTION 0.5
RESISTANCE TOLERANCE PER SECTION IN PERCENT	SINGLE SECTION -20.0 TO 20.0
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	SINGLE SECTION 70.0
SWITCH CURRENT TYPE AND RATING IN AMPS	AC 0.500 AND DC 1.500
TERMINAL TYPE AND QUANTITY	TAB, SOLDER LUG 5

MOE rule	MOE CD	AMC	AMSC	Date assigned	PICA	PICA LOA	Auth collab
YB01	YB			01-APR-91	YB	81	YB
DGX1	DS	3	H	01-JAN-26	GX	01	GX

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: C
3/4 inch thick
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0130
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.