Catalog item
Request a quoteRESISTOR,VARIABLE,WIRE WOUND,PRE
5905FSC
01NCB code
112-7456Item number
NIIN 01-112-7456
- Unit price
- $1,278.59
- Unit of issue
- EA
- Source of supply
- SMS
- DEMIL code
- A
Identification
- Item name code
- 37408
- PINC
- 0037408
- Criticality code
- X
- II
- 0
- DEMIL code
- A
- NIIN assigned
- 08-MAY-81
- Precious metals indicator
- A
- Hazardous material indicator
- N
- Schedule B export code
- 8533390080
- FedMall
- Y
Management
| Effective date | Major organizational entity | Acquisition advice code | Source of supply | Unit of issue | Unit of measure quantity | Unit price | Quantity per unit pack | Controlled inventory item code | Shelf-life code | Recoverability code | Management control | Net price | USC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 01-OCT-2026 | DA | X | SMS | EA | 0.0000 | $1,278.59 | 1 | U | 0 | Z | Q2200X- | $0.00 | A |
| 01-OCT-2026 | DS | X | SMS | EA | 0.0000 | $1,278.59 | 1 | U | 0 | N | ------- | $0.00 | I |
Part numbers
Characteristics
| SECTION QUANTITY | 1 |
|---|---|
| BODY STYLE | |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| PILOT DIAMETER | INCHES MAXIMUM 1.0000 |
| PILOT LENGTH | INCHES MAXIMUM 0.0670 |
| OVERALL LENGTH | INCHES MAXIMUM 0.995 |
| UNDERCUT DIAMETER | INCHES MAXIMUM 1.000 |
| UNDERCUT WIDTH | INCHES MAXIMUM 0.0670 |
| BODY DIAMETER | INCHES MAXIMUM 1.065 |
| SHAFT DIAMETER | INCHES MAXIMUM 0.1249 |
| SHAFT LENGTH | INCHES MAXIMUM 0.512 |
| BODY LENGTH | INCHES MAXIMUM 0.650 |
| OVERALL DIAMETER | INCHES MAXIMUM 1.338 |
| MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.0650 |
| MOUNTING LIP DEPTH | INCHES MAXIMUM 0.0670 |
| SHAFT STYLE | |
| ACTUATOR TYPE | SINGLE SHAFT |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MAXIMUM 358.0 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.50 |
| SHAFT END PLAY | INCHES 0.005 |
| SHAFT RUNOUT | INCHES 0.002 |
| LATERAL RUNOUT | INCHES 0.002 |
| PILOT DIAMETER RUNOUT | INCHES 0.001 |
| SHAFT RADIAL PLAY | INCHES 0.002 |
| MOUNTING METHOD | CLAMP RING(S) |
| BEARING TYPE | SHAFT BALL |
| FEATURES PROVIDED | HUMIDITY PROOF |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -2.00 TO 2.00 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 100.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-12934-004 |
| TERMINAL TYPE AND QUANTITY | TURRET 3 |
MOE rules
- MOE rule
- A918
- MOE CD
- DA
- AMC
- 3
- AMSC
- H
- Date assigned
- 01-APR-06
- IMC
- Z
- IMCA
- CD
- PICA
- GX
- PICA LOA
- 01
- SICA
- CD
- SICA LOA
- 5D
- Auth collab
- CD GX
- Fmr MOE rl
- A196
Service data
Army
- Matcat 1
- Q
- Matcat 2
- 2
- Matcat 3
- 2
- Matcat 4 5
- 00
- ARC
- X
Freight
- ACTY CD
- TX
- NMFC
- 061700
- NMFC sub
- Z
- Uniform freight class
- 34580
- Less than truckload
- W
- Water commodity code
- 72D
- Type of cargo code
- Z
- Special handling code
- 9
- Air dimension code
- A
- Air commodity code
- HZ
- NMF description
- ELEC APPLIANCES/INSTRUMENTS NOI
Packaging
Unit and preservation
- PICA SICA
- P
- PKG cat
- 69F0
- Unpackaged weight
- 0.0000
- Unpackaged width
- 0.000
- Unpackaged length
- 0.000
- Unpackaged height
- 0.000
- Intermediate container qty
- AAAQuantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
- Method of preservation
- ZZSpecial requirements apply that are not represented by the code symbols; details are provided with the acquisition...
- Clng drying
- 1Any suitable process that is not injurious to the item.
- Pres mat
- ZZSpecial requirement – See specific instructions or drawings provided
- Wrap mat
- ZZSpecial requirements – see specific instructions or drawings provided
- Cush dun
- ZZSpecial requirements.
- THK
- C3/4 inch thick
- Unit cont
- ZZSpecial requirement – See specific instructions or drawings provided.
- PKG data source
- P
Unit pack
- PICA SICA
- P
- SPC MKG
- ZZSpecial requirements
- Inter cont
- ZZSpecial requirement – See specific instructions or drawings provided.
- Lvl A
- QPacking shall be accomplished in accordance with table C.II for the packing level specified.
- Lvl b
- QPacking shall be accomplished in accordance with table C-II for the packing level specified.
- Unit pack weight
- 0.1000
- UP SZ MAXB
- 0.00000
- UP SZ MAXL
- 0.00000
- UP SZ MAXH
- 0.00000
- Unit pack cube
- 0.0030
- OPI
- MAll packaging data is mandatory for compliance and no substitutions are permitted.
- Supplemental instructions
- UNIT PACKAGE MARKING REQUI
Packaging instructions
- PICA SICA
- P
- PKG design ACTY
- 14933
- SPI date
- 00000
Related items
Standardization
- Item standardization code
- 5
- Orig stdzn dec
- 97
- Dt stdzn dec
- 08-MAY-1981
- NIIN status code
- 0
Request a quote
Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.