CAPACITOR,FIXED,ELECTROLYTIC

5910FSC

00NCB code

192-0315Item number

NIIN 00-192-0315

Identification

Part number: 580R596H39
CAGE: 97942
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP
CAGE status: A
RNCC: 3
RNVC: 2
Document availability code: 2
RNAAC: SB
RNFC: 3
RNSC: D

SCHEMATIC DIAGRAM DESIGNATOR
BODY HEIGHT	INCHES MAXIMUM 0.150
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	INCHES MINIMUM 0.275 AND INCHES MAXIMUM 0.325
NONDERATED OPERATING TEMP	CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0
MATERIAL	CASE PLASTIC
TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97942-580R596
TERMINAL TYPE AND QUANTITY	UNINSULATED WIRE LEAD 2
ELECTRICAL POLARIZATION	POLARIZED
END ITEM IDENTIFICATION	AN/ALQ-101 PECULIAR
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	DC SINGLE SECTION 20.0
BODY STYLE
RELIABILITY INDICATOR	NOT ESTABLISHED
TERMINAL LENGTH	INCHES NOMINAL 1.620
BODY LENGTH	INCHES MAXIMUM 0.375
TERMINAL SURFACE TREATMENT	SOLDER
BODY WIDTH	INCHES MAXIMUM 0.475
TOLERANCE RANGE PER SECTION	PERCENT SINGLE SECTION -10.00 TO 10.00
CAPACITIVE ELECTRODE MATERIAL	TANTALUM
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	8.0000
DC LEAKAGE AT REFERENCE TEMP	MICROAMPERES 9.000
ANODE TYPE	SOLID
CAPACITANCE VALUE PER SECTION	MICROFARADS SINGLE SECTION 22.000

MOE rule	MOE CD	AMC	AMSC	Date assigned	PICA	PICA LOA	Auth collab	Supp collab	Fmr MOE rl
WP01	WP			01-JUL-06	WP	81	WP
DGX1	DS	3	L	01-JUL-05	GX	01	GX	TX	DTX1

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: EA
MIL-DTL-17667, neutral wrapping paper
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.3000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0030
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.