CIRCUIT BREAKER

5925FSC

00NCB code

283-6516Item number

NIIN 00-283-6516

Identification

STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	SINGLE LOCATION AC 125.0
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	INCHES NOMINAL 2.624
POLE QUANTITY	1
TRIP RELEASE CHARACTERISTIC	SINGLE LOCATION TIME DELAY
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	120.0
RESET METHOD	MANUAL
UNTHREADED MOUNTING HOLE DIAMETER	INCHES NOMINAL 0.209
MANUAL ACTUATOR TYPE AND QUANTITY	TOGGLE 1
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
MOUNTING FACILITY TYPE AND QUANTITY	UNTHREADED HOLE(S) 2
INTERNAL TRIP RELEASE CONFIGURATION	SINGLE LOCATION SERIES TRIP
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	SINGLE LOCATION NOMINAL AT 200 PCT 48.000 AND NOMINAL AT 300 PCT 13.000
MOUNTING SURFACE TO TERMINAL END DISTANCE	INCHES MAXIMUM 2.547
BODY LENGTH	INCHES NOMINAL 3.750
BODY WIDTH	INCHES NOMINAL 0.969
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	INCHES NOMINAL 2.624
TERMINAL TYPE AND QUANTITY	SCREW 2
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	SINGLE LOCATION AC 5000.0
CIRCUIT PROTECTION TYPE	SINGLE LOCATION OVERCURRENT
TRIP RELEASE METHOD	SINGLE LOCATION MAGNETIC
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	GENERAL PURPOSE
TRIP RELEASE AMBIENT TEMP RATING	SINGLE LOCATION CELSIUS NOMINAL 25.0
FREQUENCY IN HERTZ	60.0
MATERIAL	CASE PLASTIC
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BODY STYLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	SINGLE LOCATION AMPERES AC 10.0

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: DO
Any suitable fiber box included in this table may be used (see J.4.9.1).
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.4000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.