SWITCH,SENSITIVE

5930FSC

00NCB code

225-0369Item number

NIIN 00-225-0369

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
G315258	64959 AMERICAN TELEPHONE AND TELEGRAPH CO	R	5	9	A	TX	3	B
G315258	91929 HONEYWELL INTERNATIONAL INC. DBA HONEYWEEL SENSING & CONTROLS	A	3	9	5	TX
X27874	91929 HONEYWELL INTERNATIONAL INC. DBA HONEYWEEL SENSING & CONTROLS	A	5	9	5	TX	3	D

CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515
ACTUATOR STYLE
MAXIMUM VOLTAGE RATING IN VOLTS	AC 250.0 AND DC 250.0
SWITCH ACTUATING FORCE	OUNCES MAXIMUM 15.0
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	MILLIAMPERES RESISTIVE DC 250.000 AND AMPERES RESISTIVE AC 15.000
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
TERMINAL TYPE AND QUANTITY	SCREW 3
BODY LENGTH	INCHES MINIMUM 1.673 AND INCHES MAXIMUM 1.683
ACTUATOR HEIGHT	INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390
ACTUATOR FREE POSITION HEIGHT	INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515
OVERALL LENGTH	INCHES NOMINAL 2.156
OVERALL HEIGHT	INCHES NOMINAL 1.566
OVERALL WIDTH	INCHES NOMINAL 0.520
ACTUATOR DIAMETER	INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265
BODY STYLE
MOUNTING METHOD	UNTHREADED HOLE(S)
SWITCH RELEASE FORCE	OUNCES MINIMUM 4.0
INCLOSURE TYPE	FULLY INCLOSED
UNTHREADED MOUNTING HOLE DIAMETER	INCHES NOMINAL 0.375
THREAD QUANTITY PER INCH	32
NOMINAL THREAD SIZE	INCHES 0.138
NONPILE-UP CONTACT ARRANGEMENT	SINGLE SWITCH UNIT POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED 1
BODY WIDTH	INCHES MINIMUM 0.505 AND INCHES MAXIMUM 0.535
BODY HEIGHT	INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.145

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: EA
MIL-DTL-17667, neutral wrapping paper
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.2000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0900
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.