SWITCH,PRESSURE

5930FSC

00NCB code

964-2735Item number

NIIN 00-964-2735

Identification

THREAD CLASS	2B
NONPILE-UP CONTACT ARRANGEMENT	POLE, DOUBLE THROW, ONE POSITION MOMENTARY 1
OVERALL WIDTH	INCHES NOMINAL 2.630
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	INCHES NOMINAL 1.500
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	INCHES NOMINAL 1.500
CONTACT STIMULUS RATING	ACTUATION POINT MINIMUM POUNDS PER SQUARE INCH ABSOLUTE 27.00 AND ACTUATION POINT MAXIMUM POUNDS PER SQUARE INCH ABSOLUTE 37.00 AND DEACTUATION POINT MINIMUM POUNDS PER SQUARE INCH ABSOLUTE 25.00 AND DEACTUATION POINT MAXIMUM POUNDS PER SQUARE INCH ABSOLUTE 35.00
PRESSURE CONNECTOR TYPE	SINGLE CONNECTION FLARED, THREADED EXTERNAL
MEDIA FOR WHICH DESIGNED	GAS
PROPRIETARY CHARACTERISTICS	PACS
THREAD SERIES DESIGNATOR	ALL THREADED HOLE UNIFIED NATIONAL COARSE (UNC)
MOUNTING METHOD	BRACKET(S) AND THREADED HOLE(S)
OVERALL LENGTH	INCHES NOMINAL 2.660
OVERALL HEIGHT	INCHES NOMINAL 2.250
THREAD QUANTITY PER INCH	32
CONTACT ACTION STIMULUS	INCREASE
CONTACT ADJUSTABILITY	DEACTUATION POINT ADJUSTABLE, PRESET AND ACTUATION POINT ADJUSTABLE, PRESET
CONTACT ADJUSTMENT RANGE	ACTUATION POINT POUNDS PER SQUARE INCH ABSOLUTE 10.00 TO 55.00 AND DEACTUATION POINT POUNDS PER SQUARE INCH ABSOLUTE 10.00 TO 55.00
PRESSURE SWITCH TYPE	ABSOLUTE
NOMINAL THREAD SIZE	ALL THREADED HOLE INCHES 0.138
TERMINAL TYPE	CONNECTOR, RECEPTACLE
CONTACT ADJUSTMENT TYPE	INTERNAL ACTUATION POINT SCREW AND INTERNAL DEACTUATION POINT SCREW
MOUNTING FACILITY PATTERN	EIGHT POSITION RECTANGULAR

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: XXX
Method of preservation: ZZ
Special requirements apply that are not represented by the code symbols; details are provided with the acquisition...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.