SWITCH,PRESSURE

5930FSC

01NCB code

283-9111Item number

NIIN 01-283-9111

Identification

INSIDE DIAMETER	SINGLE CONNECTION INCHES NOMINAL 0.250
OVERALL LENGTH	INCHES NOMINAL 3.812
OVERALL HEIGHT	INCHES NOMINAL 8.593
OVERALL WIDTH	INCHES NOMINAL 3.656
BODY HEIGHT	INCHES NOMINAL 7.562
UNTHREADED MOUNTING HOLE DIAMETER	INCHES NOMINAL 0.203
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	INCHES NOMINAL 3.000
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	INCHES NOMINAL 6.250
PRESSURE SWITCH TYPE	GAGE
MOUNTING METHOD	BRACKET(S) AND UNTHREADED HOLE(S)
CONTACT ACTION STIMULUS	INCREASE
NOMINAL THREAD SIZE	SINGLE PRESSURE CONNECTION INCHES 0.250
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR
NONPILE-UP CONTACT ARRANGEMENT	POLE, DOUBLE THROW, ONE POSITION MOMENTARY 1
TERMINAL TYPE	SCREW
CONTACT LOAD CURRENT RATING	SECOND VOLTAGE AMPERES RESISTIVE LOAD 3.0
CONTACT LOAD CURRENT RATING	FIRST VOLTAGE AMPERES RESISTIVE LOAD 5.0
CONTACT ADJUSTABILITY	ACTUATION POINT ADJUSTABLE AND DEACTUATION POINT ADJUSTABLE
CONTACT ADJUSTMENT RANGE	ACTUATION POINT POUNDS PER SQUARE INCH 0.00 TO 250.00 AND DEACTUATION POINT POUNDS PER SQUARE INCH 0.00 TO 250.00
CONTACT ADJUSTMENT TYPE	INTERNAL ACTUATION POINT SCREW AND INTERNAL DEACTUATION POINT SCREW
CONTACT VOLTAGE RATING IN VOLTS	SECOND VOLTAGE DC AT SEA LEVEL 600.0
CONTACT VOLTAGE RATING IN VOLTS	FIRST VOLTAGE AC AT SEA LEVEL 240.0
PRESSURE CONNECTOR TYPE	SINGLE CONNECTION PLAIN, THREADED INTERNAL
MEDIA FOR WHICH DESIGNED	GAS OR LIQUID
PRECIOUS MATERIAL AND LOCATION	SILVER CONTACTS
PRECIOUS MATERIAL	SILVER
STYLE DESIGNATOR
THREAD SERIES DESIGNATOR	SINGLE PRESSURE CONNECTION NPTF

PICA SICA: P
PKG cat: 69Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: XXX
Method of preservation: ZZ
Special requirements apply that are not represented by the code symbols; details are provided with the acquisition...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.