CONNECTOR,RECEPTACLE,ELECTRICAL

5935FSC

00NCB code

400-8691Item number

NIIN 00-400-8691

Identification

THREAD SERIES DESIGNATOR	UNEF
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	INCHES MINIMUM 0.680 AND INCHES MAXIMUM 0.712
BODY STYLE
CONTACT REMOVABILITY	SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
THREAD DIRECTION	RIGHT-HAND
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT
THREAD QUANTITY PER INCH	20
MOUNTING FACILITY THICKNESS	INCHES NOMINAL 0.125
SHELL TYPE	SOLID
MATING END QUANTITY	1
INSERT MATERIAL	SINGLE MATING END RUBBER SYNTHETIC
TERMINAL TYPE	SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CHROMATE
INCLUDED CONTACT QUANTITY	5
BUSHING ACCOMMODATION HOLE SHAPE	ROUND
INCLUDED CONTACT TYPE	SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET
PRECIOUS MATERIAL AND LOCATION	GOLD CONTACT SURFACE AND SILVER CONTACT SURFACE
PRECIOUS MATERIAL AND WEIGHT	GOLD GRAINS, TROY 0.025 AND SILVER GRAINS, TROY 0.025
PRECIOUS MATERIAL	GOLD AND SILVER
OVERALL DIAMETER	INCHES MINIMUM 1.359 AND INCHES MAXIMUM 1.391
CONTACT MATERIAL	SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY
CONTACT SURFACE TREATMENT	SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND SILVER
THREAD CLASS	2A
NOMINAL THREAD SIZE	INCHES 1.000
INSERT POSITION IN DEG	0.0
THREADED DEVICE TYPE	BACK SHELL AND MOUNTING BUSHING
OVERALL LENGTH	INCHES NOMINAL 1.352
CONNECTOR LOCKING METHOD	BAYONET PIN
NOMINAL THREAD LENGTH	INCHES 0.250
CONTACT POSITION ARRANGEMENT STYLE
TERMINAL LOCATION	SINGLE MATING END SINGLE CONTACT GROUPING BACK

PICA SICA: P
PKG cat: 69Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0010
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.