REACTOR

5950FSC

01NCB code

331-0550Item number

NIIN 01-331-0550

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNSC
WE3897	26543 WEMS ELECTRONICS TRANSFORMER GROUP	A	5	9	5	TX	B
19275	72964 ROBERT M. HADLEY COMPANY, INC.	A	5	2	5	TX
3C530	04620 RAYCO ELECTRONIC MANUFACTURING, INC. DIV RAYCO ELECTRONICS MFG INC	A	5	2	5	TX
WE3897	15634 MAGNETIKA INC	A	5	2	5	TX
841304-0001	13973 LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION	R	3	9	A	TX

RELIABILITY INDICATOR	NOT ESTABLISHED
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND VIBRATION RESISTANT
OVERALL LENGTH	INCHES MAXIMUM 1.000
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.460
OVERALL WIDTH	INCHES MAXIMUM 0.750
INDUCTANCE TYPE	FIXED
INDUCTANCE RATING	SINGLE COMPONENT SINGLE WINDING MICROHENRIES MINIMUM 50.00 AND MICROHENRIES MAXIMUM 80.00
FREQUENCY RATING	SINGLE COMPONENT KILOHERTZ NOMINAL 30.0
BODY HEIGHT	INCHES MAXIMUM 0.800
MAXIMUM OPERATING TEMP	CELSIUS 90.0
WINDING QUANTITY	1
INCLOSURE TYPE	FULLY INCLOSED
MOUNTING FACILITY QUANTITY	2
MOUNTING METHOD	SINGLE GROUP THREADED HOLE(S)
RATING METHOD	SINGLE COMPONENT SINGLE WINDING ELECTRICAL
NOMINAL THREAD SIZE	SINGLE GROUP INCHES 0.112
WINDING OPERATING CURRENT	SINGLE COMPONENT SINGLE WINDING AMPERES DC MINIMUM 1.0 AND AMPERES DC MAXIMUM 8.0
DC RESISTANCE RATING IN OHMS	0.018
TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13973-841304
THREAD SERIES DESIGNATOR	SINGLE GROUP UNIFIED NATIONAL COARSE (UNC)
TERMINAL TYPE AND QUANTITY	PIN 2

PICA SICA: P
PKG cat: 69Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: U
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping...
Unit pack weight: 0.1000
UP SZ MAXB: 0.80000
UP SZ MAXL: 1.00000
UP SZ MAXH: 1.10000
Unit pack cube: 0.0010
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.