TRANSISTOR

5961FSC

01NCB code

024-3746Item number

NIIN 01-024-3746

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
2N4867A	80131 ELECTRONIC INDUSTRIES ASSOCIATION	H	3	9	3	TX	1	D
RELEASE5609	80131 ELECTRONIC INDUSTRIES ASSOCIATION	H	5	9	3	TX	1	B
2N4867A	17856 SILICONIX INCORPORATED DIV SILICONIX	A	5	9	3	TX	1	D

OVERALL LENGTH	INCHES MAXIMUM 0.210
TERMINAL LENGTH	INCHES MINIMUM 0.500
OVERALL DIAMETER	INCHES MAXIMUM 0.230
INTERNAL CONFIGURATION	FIELD EFFECT
ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE	COLLECTOR
MOUNTING METHOD	TERMINAL
TERMINAL CIRCLE DIAMETER	INCHES NOMINAL 0.100
FEATURES PROVIDED	HERMETICALLY SEALED CASE
SEMICONDUCTOR MATERIAL	SILICON
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC	MAXIMUM DRAIN TO SOURCE VOLTAGE 20.0 AND MAXIMUM BREAKDOWN VOLTAGE, DRAIN-TO-SOURCE, WITH ALL OTHER TERMINALS SHORT-CIRCUITED TO SOURCE 40.0 AND MAXIMUM BREAKDOWN VOLTAGE, GATE-TO-SOURCE, WITH ALL OTHER TERMINALS SHORT-CIRCUITED TO SOURCE 40.0
CURRENT RATING PER CHARACTERISTIC	MILLIAMPERES MAXIMUM GATE CURRENT 50.00 AND MILLIAMPERES MAXIMUM DRAIN CURRENT 50.00
POWER RATING PER CHARACTERISTIC	WATTS MAXIMUM COLLECTOR POWER DISSIPATION 300.0
TERMINAL TYPE AND QUANTITY	UNINSULATED WIRE LEAD 4
SPECIFICATION/STANDARD DATA	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION 80131-RELEASE5909

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D1
PPP-B-566 or PPP-B-676, folding or setup box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0050
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.