TRANSISTOR

5961FSC

01NCB code

282-7236Item number

NIIN 01-282-7236

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DM	J	SMS	EA	0.0000	$26.50	1	U	0	Z	15B2---	$0.00	M
01-OCT-2026	DS	J	SMS	EA	0.0000	$26.50	1	U	0	N	-------	$0.00	I

OVERALL LENGTH	MILLIMETERS NOMINAL 38.3
OVERALL HEIGHT	MILLIMETERS MAXIMUM 11.4
OVERALL WIDTH	MILLIMETERS MAXIMUM 26.66
MOUNTING FACILITY QUANTITY	2
INTERNAL CONFIGURATION	FIELD EFFECT
JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION	TO-204
MOUNTING METHOD	UNTHREADED HOLE(S)
FEATURES PROVIDED	HERMETICALLY SEALED CASE
SEMICONDUCTOR MATERIAL	SILICON
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC	MAXIMUM BREAKDOWN VOLTAGE, DRAIN-TO-SOURCE, WITH ALL OTHER TERMINALS SHORT-CIRCUITED TO SOURCE 80.0
CURRENT RATING PER CHARACTERISTIC	AMPERES MAXIMUM DRAIN CURRENT 25.00
POWER RATING PER CHARACTERISTIC	WATTS MAXIMUM TOTAL DEVICE DISSIPATION 150.0
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT	CELSIUS AMBIENT AIR 150.0
TERMINAL TYPE AND QUANTITY	PIN 2 AND CASE 1

PICA SICA: P
PKG cat: 69Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: U
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping...
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0030
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.