TRANSISTOR

5961FSC

01NCB code

522-5349Item number

NIIN 01-522-5349

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	J	SMS	EA	0.0000	$701.64	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	J	SMS	EA	0.0000	$701.64	1	U	0	-------	$0.00	I

OVERALL LENGTH	INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.910
OVERALL WIDTH	INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.400
END ITEM IDENTIFICATION	AN/TPN-30A, MARINE REMOTE AIRCRAFT LANDING
MOUNTING FACILITY QUANTITY	2
MOUNTING METHOD	UNTHREADED HOLE(S)
SEMICONDUCTOR MATERIAL	SILICON
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC	MAXIMUM COLLECTOR TO EMITTER VOLTAGE, DC WITH BASE SHORT-CIRCUITED TO EMITTER 55.0 AND MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN 55.0 AND MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN 3.5
CURRENT RATING PER CHARACTERISTIC	MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC 3.00
POWER RATING PER CHARACTERISTIC	WATTS MAXIMUM OFF-STATE POWER DISSIPATION 110.0
PART NAME ASSIGNED BY CONTROLLING AGENCY	MICROWAVE POWER TRANSISTOR NPN SILICON, 960-1215 MHZ.
TERMINAL TYPE AND QUANTITY	RIBBON 2

PICA SICA: P
PKG cat: 27A0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: DO
Any suitable fiber box included in this table may be used (see J.4.9.1).
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.