MICROCIRCUIT,MEMORY

5962FSC

01NCB code

034-9828Item number

NIIN 01-034-9828

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC	RNFC	RNSC
104227-01	52483 COMMUNICATION SYSTEMS TECHNOLOGY INC TYLUS SYSTEMS DIV	H	3	9	1	TX	1	D
ROM/PROM FAMILY 032	16236 DLA WEAPONS SUPPORT (COLUMBUS) DBA DLA VENDOR ITEM DRAWING (VID) DIV DOCUMENT STANDARDIZATION DIVISION (VA)	A	5	1	5	TX
N82S115I	18324 PHILIPS SEMICONDUCTORS INC	H	5	9	3	TX	4	B
104227-01	18324 PHILIPS SEMICONDUCTORS INC	H	5	9	5	TX	4	B

BODY LENGTH	INCHES MINIMUM 1.190 AND INCHES MAXIMUM 1.230
BODY WIDTH	INCHES MINIMUM 0.580 AND INCHES MAXIMUM 0.610
BODY HEIGHT	INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.120
MAXIMUM POWER DISSIPATION RATING	MILLIWATTS 805.0
OPERATING TEMP RANGE	CELSIUS 0.0 TO 75.0
STORAGE TEMP RANGE	CELSIUS -65.0 TO 150.0
END ITEM IDENTIFICATION	MULTIPLEXER FSCM 52483
FEATURES PROVIDED	HERMETICALLY SEALED AND MONOLITHIC AND HIGH SPEED AND SCHOTTKY AND W/ENABLE AND W/DISABLE AND W/STROBE AND W/REGISTER OUTPUT AND PROGRAMMABLE AND PROGRAMMED AND 3-STATE OUTPUT AND W/BUFFERED OUTPUT AND W/DECODED OUTPUT
INCLOSURE MATERIAL	CERAMIC AND METAL
INCLOSURE CONFIGURATION	DUAL-IN-LINE
OUTPUT LOGIC FORM	TRANSISTOR-TRANSISTOR LOGIC
INPUT CIRCUIT PATTERN	12 INPUT
TERMINAL SURFACE TREATMENT	SOLDER
VOLTAGE RATING AND TYPE PER CHARACTERISTIC	VOLTS MAXIMUM POWER SOURCE 5.5
TIME RATING PER CHACTERISTIC	NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 40.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 35.00
MEMORY DEVICE TYPE	ROM
PRECIOUS MATERIAL AND LOCATION	GOLD TER-INALS
PRECIOUS MATERIAL	GOLD
TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 52483-104227
TERMINAL TYPE AND QUANTITY	PRINTED CIRCUIT 24

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: ZZ
Special requirements
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: U
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping...
Unit pack weight: 0.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0030
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: UNIT PACKAGE MARKING REQUI

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.