MICROCIRCUIT,DIGITAL

5962FSC

01NCB code

662-6108Item number

NIIN 01-662-6108

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DA	Y	SMS	EA	0.0000	$36.87	1	U	0	Z	Q2200X-	$0.00	A
01-OCT-2026	DS	Y	SMS	EA	0.0000	$36.87	1	U	0		-------	$0.00	I

BODY LENGTH	MILLIMETERS MINIMUM 13.8 AND MILLIMETERS MAXIMUM 14.2
BODY WIDTH	MILLIMETERS MINIMUM 13.8 AND MILLIMETERS MAXIMUM 14.2
BODY HEIGHT	MILLIMETERS MAXIMUM 1.600
OPERATING TEMP RANGE	CELSIUS -40.0 TO 110.0
END ITEM IDENTIFICATION	5855-01-564-5450
INCLOSURE CONFIGURATION	QUAD-IN-LINE
DESIGN FUNCTION AND QUANTITY	CONTROL, INTERFACE 1
CURRENT RATING PER CHARACTERISTIC	MILLIAMPERES NOMINAL INPUT 20.0 AND MILLIAMPERES NOMINAL OUTPUT 20.0
VOLTAGE RATING AND TYPE PER CHARACTERISTIC	VOLTS MAXIMUM TOTAL SUPPLY 3.6 AND VOLTS MAXIMUM OUTPUT 5.5
SPECIAL FEATURES	ITEM IS A HIGH-PERFORMANCE GENERAL-PURPOSE IEEE 1394A-200 LINK-LAYER CONTROLLER WITH THE CAPABILITY OF TRANSFERRING DATA BETWEEN THE 1394 PHY-LINK INTERFACE, AN EXTERNAL HOST CONTROLLER, AND A EXTERNAL DEVICE CONNECTED TO THE DATA-MOVER PORT.
TERMINAL TYPE AND QUANTITY	GULLWING 100

PICA SICA: P
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: 100
100 unit packs per intermediate container
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 39
ESD sensitive electronic device requirements of MIL-STD-129 apply
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: ESD AND PHYSICAL PROTECTIO

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.