ELECTRONIC MODULE,STANDARDIZED

5963FSC

01NCB code

059-1537Item number

NIIN 01-059-1537

Identification

Part number: 2833550
CAGE: 10001
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
CAGE status: A
RNCC: 3
RNVC: 2
Document availability code: 1
RNAAC: HD
RNFC: 4
RNSC: A

OVERALL LENGTH	INCHES NOMINAL 5.620
OVERALL HEIGHT	INCHES NOMINAL 1.190
OVERALL WIDTH	INCHES NOMINAL 1.950
ENVIRONMENTAL PROTECTION	SALT SPRAY RESISTANT AND VIBRATION
OPERATING TEMP RANGE	CELSIUS 0.0 TO 60.0
AVERAGE LIFE RATING	500.0
STORAGE TEMP RANGE	CELSIUS -62.0 TO 125.0
AVERAGE LIFE MEASUREMENT	HOURS
BASIC SHAPE STYLE
INCLOSURE TYPE	ENCASED
OPERATING CONTROL METHOD	AUTOMATIC
INSTALLATION DESIGN	MODULE
CONTROL TYPE	REMOTE
CONNECTION TYPE	BOTTOM PLUG CONNECTOR
CIRCUIT CONSTRUCTION TYPE	SOLID STATE
SIGNAL VOLTAGE RATING PER CHANNEL	VOLTS NOMINAL INPUT -15.000 AND VOLTS NOMINAL INPUT -5.000 AND VOLTS NOMINAL INPUT 5.000 AND VOLTS NOMINAL INPUT 15.000
SIGNAL DATA TYPE PER CHANNEL	1ST INPUT CHANNEL ANALOG VOLTAGE AND 2ND INPUT CHANNEL ANALOG VOLTAGE AND 3RD INPUT CHANNEL ANALOG VOLTAGE AND 4TH INPUT CHANNEL ANALOG VOLTAGE
MAXIMUM POWER DRAIN RATING	WATTS 2.0
CONNECTION CONTACT TYPE AND QUANTITY	PLUG CONNECTOR EXTERNAL 1
EXTERNAL DC OPERATING VOLTAGE IN VOLTS	NOMINAL 1ST VOLTAGE -15.0 AND NOMINAL 2ND VOLTAGE -5.0 AND NOMINAL 3RD VOLTAGE 5.0 AND NOMINAL 4TH VOLTAGE 15.0
SPECIAL FEATURES	KEY CODE PAQ
SPECIAL MARKINGS	INTEGRATOR AND SCALER
TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2833550

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 39
ESD sensitive electronic device requirements of MIL-STD-129 apply
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0120
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: ESD AND PHYSICAL PROTECTIO

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.